INDUSTRIAL INJECTION 0986435505SEDFLY DODGE DRAGONFLY INJECTOR FOR 2004.5-2007 5.9L CUMMINS 60HP

The Industrial Injection 60 HP / 170 percent Over Dragonfly Injectors have been extrude honed and balanced to a perfect matching set injectors that flow 27 LPM. The Dragonfly 60 HP / 13 percent Over injectors can be run with a stock turbo but one of our Phatshaft turbos or our compound turbo setups is highly recommended to help reduce EGTs.

We balance the injectors to a tighter tolerance than the original manufacturer and have put a lot of time into making these the best injectors money can buy. All the injectors we build in house are built with Brand New Factory OEM parts including the nozzles.

Features:

• 60 HP gain / 27LPM / 13 percent Over
• 1 year Unlimited Mileage Warranty

These injectors come with a new copper crush washer and o-rings for installation. Injectors are an OEM Genuine part that is a direct replacement injector. Each injector is individually tested on a state of the art Factory OEM test stand to ensure that they meet or exceed OEM specifications.

Each test includes a resistance test, system leak test, purge, idle speed test, mid load test, full load test, and static back leak test. Each test cycle checks solenoid response time, back leak flow, and fuel delivery.

When replacing the injectors in your 5.9L Common Rail we highly recommend replacing the injector connecting tubes to avoid new injector contamination. The most common failure of new injector installations is contamination and the problem that we see most on these comes from the injector connecting tubes.

Each injector has a 150 core charge and is fully refundable if they are shipped back within 45 days.

All Industrial Injection products are covered by a one year/unlimited mile warranty.

The Industrial Injection 0986435505SEDFLY Dodge Dragonfly Injector is engineered specifically for the 2004.5-2007 5.9L Cummins engine, delivering an impressive 60 HP gain with 170 percent over stock performance. Boasting a flow rate of 27 LPM, these injectors have been meticulously extrude honed and balanced to create a superior matching set, ensuring optimal fuel delivery and efficiency for your vehicle.

Designed with versatility in mind, the Dragonfly 60 HP injectors can operate with a stock turbo, although pairing them with one of Industrial Injection’s Phatshaft turbos or a compound turbo setup is highly recommended. This combination significantly reduces exhaust gas temperatures (EGTs), enhancing engine longevity and performance.

Constructed from brand new factory OEM parts, including precision nozzles, these injectors meet stringent manufacturing standards. Each injector undergoes extensive testing on a state-of-the-art factory test stand, ensuring that they meet or exceed OEM specifications. Tests include assessments of resistance, system leakage, idle speed, mid-load and full-load performance, as well as static back leak metrics, solidifying their reliability.

Installation of the Dragonfly injectors is made easier with included copper crush washers and O-rings. To prevent contamination during installation, it is strongly advised to replace the injector connecting tubes alongside the injectors, as contamination is a common cause of new injector failures.

Backing these injectors is a robust one-year unlimited mileage warranty, ensuring peace of mind with every purchase. Each injector is also subject to a refundable core charge of $150, valid for returns within 45 days. Experience unrivaled performance and reliability with the Industrial Injection Dragonfly Injectors, the perfect upgrade for your Cummins engine.