OIL LINES AND DRAINS

-6 AN Black Nylon Braided Flex Hose (50 foot roll)

-6 AN Two-Tone Black Red Nylon Braided Flex Hose (5 foot roll)

-6 AN Two-Tone Black Blue Nylon Braided Flex Hose (5 foot roll)

-6 AN Black Nylon Braided Flex Hose (5 foot roll)

-6 AN Two-Tone Black Red Nylon Braided Flex Hose E85 Friendly (20ft Roll)

-6 AN Two-Tone Black Blue Nylon Braided Flex Hose (20 foot roll)

-6 AN Black Nylon Braided Flex Hose (20 foot roll)

-6 AN Two-Tone Black Red Nylon Braided Flex Hose (10 foot roll)

-6 AN Two-Tone Black Blue Nylon Braided Flex Hose (10 foot roll)

-6 AN Black Nylon Braided Flex Hose (10 foot roll)

-6 AN Black Nylon Braided Flex Hose (2 foot roll)

SS Braided Flex Hose -6 AN 0.34in ID (50 foot roll)

-6 AN SS Braided Flex Hose (5 foot roll)

-4 AN SS Braided Flex Hose (10 foot roll)

Univ Oil Feed Kit 4ft Teflon lined S.S. hose with two -4AN female fittings preassembled

Univ Oil Feed Kit 3ft Teflon lined S.S. hose with two -4AN female fittings preassembled

Univ Oil Feed Kit 2ft Teflon lined S.S. hose with two -4AN female fittings preassembled

Make turbo installations easier and ensure good oil supply to your turbocharger with our remote oil feed line! Problem: The factory turbo oil feed used on the 2001-2016 Duramax's is supplied off of the number 4 cam journal bearing, which can be...

Problem: The factory turbo oil feed used on 2001-2016 Duramax's is supplied off of the #4 cam journal bearing, which can be restrictive, or even result in an oil blockage if the bearing slips. Solution: Fleece Performance's remote oil feed line allows...

Billet AL Oil Drain Flange w integrated -10 AN fitting T3 T3 T4 T04 GT40-GT55 BB Turbos

Billet Aluminum Oil Drain Flange (T3 T3 T4 and T04) - tapped 1 2in NPT

Univ Top Mount Oil Drain Kit incl 20in Teflon lined S.S. hose Fitting

Duramax S300-S400 Turbo Installation Kit Fleece Performance 2001-2010 Contents: Dash 6 Oil Feed Line 90 Degree Oil Feed Fitting Engine Block Oil Feed Fitting Turbo Drain Flange Upper Turbo Drain Flange Lower Turbo Drain Flex Extension 3/8 Turbo Drain...

-6 High Pressure braided steel line Complete with inlet/ outlet fittings   2G Single Turbo Line: (this line would replace stock line) ONE END - comes with -6 JIC to M12 to a male -6 JIC.  OTHER END - -6 JIC to M12...

-6 Male to 90 degree female NPT fitting.  Used on the -6 turbo oil feed lines.

 -4 Male to 90 degree f   emale NPT fitting.  Used on the -4 turbo oil feed lines            WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov  

 Turbo Oil Feed Fitting   -6 JIC to M12 O-ring used for higher oil flow lines Fits holset turbo inlet size & cummins oil filter head outlets 5.9 & 6.7 cummins Aluminum with o-ring seal  Also may be used as an oil inlet fitting on...

Turbo Oil Feed Fitting -4 JIC to M12 O-ring Fits holset turbo inlet size & cummins oil filter head outlets 5.9 & 6.7 cummins Aluminum with o-ring seal  Also may be used as an oil inlet fitting on most 300 turbos and as an alternate oil...

Description: Straight Adapter Fitting; Size: -4AN x 1/8" NPT Material: Steel MSRP ($US): $15.97 Warranty: One Year Limited Warranty      WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

-4 High Pressure braided steel line Complete with inlet/ outlet fittings 2G Single Turbo Line: (this line would replace stock line) ONE END - comes with -4 JIC to m12 to a male -4 JIC.  OTHER END - -4 JIC to M12 O-ringed...