DPS DCT0185A ADD-A-TURBO KIT FOR 1994-1997 CUMMINS STOCK OVER S475 MAX 600HP

Add A Turbo Kit 5.9 Cummins Twin Turbo Using Stock Turbo

S475 over stock Cummins

Fits 12V, 24V or 6.7 Diesel Trucks
*EGR, DPF and exhaust brake can remain intact, if desired*

Diesel Power Source, Add a Turbo Kit for Cummins is a Twin Turbo Using Stock Turbo. For the best towing, low EGT's and power. Works with or without factory emissions.

Spools like factory and cools high EGT’s 250 - 400 degrees.

Improves air flow by nearly 3 times.

The Diesel Power Source Add A Turbo Kit includes everything for install.

Features & Benefits:

• Can be used with or without emissions for the years 2010-2018.
• 2007.5-2009 Stainless piping is provided with kit.
• Direct bolt-on application, no fabrication needed.
• Clamps onto factory exhaust.
• DPS hot pipe re-routes all exhaust in one amazing cast hot pipe.
• Large, high flow air filter.
• 4 inch downpipe included (2-piece for ease of install).
• Low pressure charge pipe is silicone with Kevlar/Nomex liner.
• Uses stock HE351VE turbo.
• Retains factory exhaust brake.
• Support Bracket for S400 Turbo
• Flexible Steel braided oil supply lines, and OEM quality oil drain lines (flexible stainless steel).
• S475 Turbo (S400 with 75mm compressor wheel) as large turbocharger
• Upgrade options include increasing the S475 turbo up to an S480 or even an S483 Call for details.)
• Increases power by 22% or more.
• Lightning Fast Spool-Up. Diesel Power Source, Twin Turbo S475 over stock Cummins trucks performs excellent when Racing, Towing, or Sled Pulling, and are so driveable.
• EGT's are typically reduced by 250-400 degrees.
• Horsepower, and torque on the Dodge Ram Twin Turbos are increased throughout the entire RPM band, and significantly increased in mid and upper range. Typically increases horsepower by 22%-26%. A 400 HP truck will typically gain appx. 95-105 HP.

DPS Cummins Twin Turbo kit using stock turbo will run cool, clean and powerful. Specifically designed to operate awesome from stock horsepower all the way up to 600 horsepower. (If going beyond 600 HP we recommend using the S480 turbo, additional fee will apply. S480 is good to 700 HP with this kit.)

This Cummins Twin Turbo using stock turbo kit was designed on cutting edge CAD/CAM Software, using CFD (Computational Fluid Dynamics) Testing. You will not find a more advanced kit on the market today. Everything fits like it was built from the factory and works with or without emissions intact.

Kit includes:

• Air Filter
• Hot Pipe
• Support Bracket for S400 Turbo
• New Air Intake tubing
• Low-Pressure Charge Pipe
• 1-S475 Turbo (large turbo 75mm compressor wheel/ 96m turbine wheel, 1.32 A/R Housing)
• Steel Braided High Temp Oil Supply Lines
• All necessary coolant lines
• All necessary A/C relocation lines
• Stainless steel exhaust tubing, tig welded.
• Flex Oil Drain Line
• All necessary gaskets, fittings, bolts, nuts & clamps
• Heat wrap

*Use your stock HE351VE turbocharger with this kit*

Reasons Why Our Compound Turbos Work So Well

• The air entering the cylinders is cooler, because dual compressors work together within their most efficient zone. The boost air is typically over 100 cooler than from a single turbo.
• The air entering the cylinder is at higher pressure, bringing the boost pressure and exhaust drive pressures near a 1:1 ratio. The intake stroke can actually produce power.
• There are additional air molecules in the cylinder which do not get involved in combustion which carry the heat out of the cylinder (similar to how a jet engine is cooler).

• It has more complete combustion in the cylinders because there’s more air in the cylinder to burn all of the fuel. 
   

  ** The standard kit includes an S475. (Additional fee for 80mm and 83mm compressor wheel upgrades).

** This kit is capable of over 60 PSI, head studs are highly recommended for boost pressure over 45 psi

**A coolant reservoir is provided with 2010 2011 2012 2013 2014 2015 2016 2017 2018 kits.

Transform your 1994-1997 Cummins into a powerhouse with the DPS DCT0185A Add-A-Turbo Kit. Designed specifically for the 5.9 Cummins, this twin turbo kit utilizes the robust stock turbo to deliver an exhilarating performance upgrade without compromising on reliability.

Ideal for a variety of applications, whether you’re towing heavy loads or racing, this add-on enhances horsepower significantly. Capable of supporting up to 600HP with improved airflow nearly three times over stock, you’ll enjoy lower EGT’s while experiencing a quick spool-up that mirrors factory performance.

• Compatible with 12V, 24V, or 6.7 Diesel Trucks
• Easy installation with direct bolt-on application; no fabrication required
• Retains factory exhaust brake and emissions systems if desired
• Upgrades available to S480 or S483 turbo models for even more power
• High-flow air filter and large downpipe included for optimal airflow
• Reduces EGT's by 250-400 degrees, enhancing engine life
• Supports an increase of 22%-26% in horsepower across the RPM range
• Constructed with advanced CAD/CAM software for a factory-like fit
• All necessary components included: hot pipe, coolant lines, oil supply lines, gaskets, and heat wrap
• Performance tested using Computational Fluid Dynamics for efficiency

Take your driving experience to the next level with the DPS Add-A-Turbo Kit. Whether you're racing down the track or climbing steep grades, this kit guarantees a cooler, cleaner, and more powerful ride that’s sure to impress.