PPE 114053020 DEEP ENGINE OIL PAN BLACK 2017+

PPE solves the GM Duramax L5P complete oil drainage problem. During regular oil changes, the stock GM pan retains over half a quart of the dirtiest, heaviest part of the oil which settles to the bottom of the valley of the stock pan. This old oil is trapped in the valley of the stock pan and never drains out. It immediately contaminates your fresh oil.

PPE solves that filthy problem with a flat, angled bottom, designed for more complete drainage. The PPE pan's higher volume holds an additional two quarts of oil. Your engine's fluid capacity is increased, as well as its thermal stamina, which creates a longer service life. Engine temperatures are further reduced because the PPE L5P Oil Pan is constructed of thick, cast aluminum alloy, designed with internal ribs that add strength and rigidity.

Plus, we've tapped the side with a convenient NPT port if you want to run a temperature sensor.

A powerful neodymium magnet-equipped, billet, the hardened stainless steel drain plug is included to pull ferrous metals out of your oil before they can damage the internals. An O-ring is also included, to ensure a tight seal.

Replace your factory-stamped steel oil pan and get rid of that dirty oil that you've been holding on to. Give your L5P a fresh, clean start with this simple bolt-on upgrade.

Recommendation Disclaimer: Replace with a new copper washer after each service.

Part # 114052002 14mm Copper Washer

• Deep Engine Oil Pan Blac 2017+ PPE Diesel

The PPE 114053020 Deep Engine Oil Pan in black transforms your 2017+ GM Duramax L5P engine maintenance experience. This high-quality oil pan addresses the persistent issue of incomplete oil drainage, which can lead to oil contamination and reduced engine efficiency. With its innovative design, the PPE oil pan not only enhances performance but also prolongs the life of your engine.

Engineered with a flat, angled bottom, the PPE oil pan ensures that you maximize oil drainage, eliminating the old, dirty oil that typically lingers in the stock pan. This upgrade holds an additional two quarts of oil compared to the factory pan, increasing thermal stamina and reducing overall engine temperatures. Constructed from thick cast aluminum alloy with internal ribs for added strength, it stands up to demanding applications.

• Increases oil capacity by two quarts
• Flat, angled bottom for complete drainage
• Thick cast aluminum construction for strength and durability
• Included NPT port for easy temperature sensor installation
• Bolt-on upgrade for hassle-free installation
• Neodymium magnet-equipped drain plug for superior filtration
• Includes O-ring for leak-free operation

Make the smart choice for your L5P and replace your stock oil pan with the PPE 114053020 Deep Engine Oil Pan. Experience the benefits of cleaner oil and enhanced engine performance with this easy-to-install solution. Don’t forget to use a new copper washer for every service to maintain optimal performance.