MAHLE
MAHLE CB-1810P-.25MM H-SERIES ROD BEARING (.25MM) FOR 2001-2016 GM 6.6L DURAMAX ENGINE
- SKU:
- MCICB1810P25MM
- MPN:
- CB1810P25MM
- Shipping:
- Calculated at Checkout
Description
The MAHLE CB-1810P-.25MM is a high-performance connecting rod bearing designed for specific applications, particularly in the automotive and diesel engine sectors. Below are the key specifications and details:
Specifications
-
Part Number: CB-1810P-.25MM
-
Type: P-Series Performance Connecting Rod Bearing
-
Undersize: 0.25mm
-
Material: Tri-metal construction with TM-77 overlay
-
Design Features:
-
High crush for maximum retention
-
Reduced overlay thickness to prevent fatigue
-
Hardened steel back for added strength and resistance to fretting
-
Eccentricity to minimize rod bore contact and reduce wear
-
-
Dimensions:
-
Standard Shaft Diameter (min.): 2.4764 inches
-
Standard Shaft Diameter (max.): 2.4772 inches
-
Bearing O.D. or Housing Bore (min.): 2.6392 inches
-
Bearing O.D. or Housing Bore (max.): 2.6398 inches
-
Max. Length: 0.9340 inches
-
Max. Wall Thickness: 0.0805 inches
-
Vertical Oil Clearance (max.): 0.0034 inches
-
-
Sold As: Set of 8
-
Warranty: Minimum of 12 months
Vehicle Fitment
The MAHLE CB-1810P-.25MM bearing set is compatible with the following GM vehicles equipped with the 6.6L Duramax diesel engine:
-
Chevrolet Silverado 2500HD/3500HD (2001–2016)
-
GMC Sierra 2500HD/3500HD (2001–2016)
-
Chevrolet Express 2500/3500 (2001–2016)
-
GMC Savana 2500/3500 (2001–2016)
SDR Required Flag | No |
---|---|
Warranty Time UOM | Months |
Warranty Time | 12 |
Country of Origin (Primary) | United States |
Taxable | Yes |
Harmonized Tariff Code (Schedule B) | 8483308090 |
Life Cycle Status Code | Available to Order |
Unit of Measure | Inches |
---|---|
Bearing Material | TM-77 |
Standard Shaft Diameter (min.) | 2.4764 |
Standard Shaft Diameter (max.) | 2.4772 |
Vertical Oil Clearance (max.) | 0.0034 |
Max. Wall | 0.0805 |
Max. Length | 0.9340 |
Bearing O.D. or Housing Bore (min.) | 2.6392 |
Bearing O.D. or Housing Bore (max.) | 2.6398 |
Size | 0.25 mm Undersize |
Bearing Note | Crankshaft Must Be Nitride Heat Treated After Machining |
Bearing Item Grade | OE Replacement |
Meets or Exceeds Original Equipment Manufacture Specifications | Yes |
Bearing Series | P |
Type of package | Smallest Pack (Consumer Level) |
---|---|
Quantity per packing unit | 2 |
package level GTIN | 00027067379733 |
Height (Inch) | 1.25 |
Width (Inch) | 3.187 |
Length (Inch) | 2.25 |
weight (Pounds Gross) | 0.201 |