INDUSTRIAL INJECTION PDM-360.040 GM PERFORMANCE CAST PISTONS FOR 01-16 DURAMAX .040 OVER

Duramax .040 Over Performance Cast Pistons Set Coated Tops and Skirts Deliped Set ( No Valve Relief ) PDM's Ceramic Piston Skirt Coating, is designed to be used, on any rigid or semi rigid surface experiencing sliding, rotating or oscillating friction.

This coating will carry loads in excess of 350,000 PSI as well as lubricate at temperatures in excess of 1600f. This coating combines the durability of a ceramic resin with the lubricity of the ceramic lubricant.

It is used in applications where high temperatures, high loads and high speeds are experienced. When higher temperatures, than most other types of coatings can provide protection at, are experienced, this coating is fully capable of carrying the load.

Gray in color it acquires a glass like finish in use. Cured film thickness of .001 or less requires no change is piston clearance.

PDM's Thermal Barrier Coating for piston tops is Designed for Performance engines running; Nitrous oxide, Supercharged or Turbocharged. It creates a hard surface specifically designed for engines running High volumes of fuel and/or high compression ratios.

The thermal barrier coating. Reduces part temperature. Keeps heat in combustion chamber longer through the power stroke. Increase torque, H.P. and improved combustion chamber efficiency.

Details:

• .040 Over
• Ceramic Piston Skirt Coating
• Thermal Barrier Coating

The INDUSTRIAL INJECTION PDM-360.040 GM Performance Cast Pistons are meticulously designed for Duramax engines ranging from 2001 to 2016, catering to performance enthusiasts seeking superior power and efficiency. This set of .040 over pistons features a range of advanced technologies, ensuring peak performance under extreme conditions.

Each piston is equipped with a state-of-the-art ceramic piston skirt coating, specifically formulated to withstand high loads exceeding 350,000 PSI while lubricating effectively at temperatures surpassing 1600°F. This unique coating combines the strength of a ceramic resin with exceptional lubricity, making it ideal for applications involving intense sliding, rotating, or oscillating friction. The gray finish of the coating evolves into a glass-like surface over time, maintaining optimal performance without requiring adjustments in piston clearance, thanks to a cured film thickness of .001 or less.

These pistons are also fitted with a thermal barrier coating on their tops, purpose-built for high-performance engines utilizing nitrous oxide, supercharging, or turbocharging. This innovative coating significantly reduces part temperatures, allowing heat to remain within the combustion chamber longer during the power stroke. The result is an impressive increase in torque, horsepower, and overall combustion efficiency, catering perfectly to those running high volumes of fuel or elevated compression ratios.

With no valve relief, the INDUSTRIAL INJECTION PDM-360 pistons are perfect for modification enthusiasts looking to unleash their engine's potential. Experience enhanced performance and durability with these expertly engineered pistons, making them an indispensable addition to your Duramax build.