FASS PF3001 PARTICULATE FILTER

The FASS PF3001 Particulate Filter is the current suction-side filter used with modern FASS systems. Rated at 144 microns, it reduces cavitation, improves flow, and helps the pump run quieter. The PF3001 must be used with the matching XWS3002 Extreme Water Separator for proper two-stage filtration and correct placement.

Fitment & System Notes

• System compatibility: FASS Titanium, Titanium Signature, and Drop-In Series systems.
• Filter placement (updated systems): PF3001 on the suction side; XWS3002 on the pressure side.
• Do not mix with discontinued FS/FF filters (FF-3003/FF-3010 or FS-1001/FS-1020).

Installation & Manuals

For system diagrams and filter placement, see the official FASS manuals: FASS Installation Manuals.

Cross-Reference & Related FASS Items (CPP Diesel)

• FASS XWS3002 Extreme Water Separator — required companion filter.
• FASS PF3001XL Extended Length Particulate Filter — longer canister for extended service interval.
• FASS XWS3002XL Extended Length Extreme Water Separator — XL companion to PF3001XL.
• FASS FP3000 Filter Pack — (2) XWS3002 + (2) PF3001.
• FASS FLP3000 Fleet Pack — (3) XWS3002 + (3) PF3001.
• FASS FP3000XL Filter Pack — (1) XWS3002XL + (1) PF3001XL.
• FASS FLP3000XL Fleet Pack — (3) XWS3002XL + (3) PF3001XL.

FAQ

No. PF3001 is a particulate prefilter (144 micron) used on the suction side. Pair it with the XWS3002 (2-micron absolute water separator) on the pressure side.

No. Do not mix PF3001/XWS3002 with the older FF-3003/FF-3010 or FS-1001/FS-1020 filters.

Yes—PF3001 supports Titanium, Titanium Signature, and Drop-In Series systems.

Reduced cavitation, increased flow properties, and quieter pump operation.

Specifications for Fass PF3001