HEAT CONTROL PRODUCTS
HEAT CONTROL PRODUCTS — 2013–2018 DODGE RAM 6.7L CUMMINS
Keep heat where it belongs and protect everything else. CPP Diesel curates proven turbo blankets, titanium exhaust wraps, clamp-on shields, adhesive barriers, and heat sleeves sized for the 2013–2018 Ram 2500/3500 6.7L Cummins. Reduce under-hood temps, safeguard wiring and hoses, and help maintain cooler intake air for towing, work, and competition.
Shop the full 13–18 Heat Control Products category
Turbo Blankets & Turbo Safety
- CPP Heat Block T-3 Turbo Blanket — universal T3 coverage to retain turbine heat and cut radiant temps.
- CPP Heat Block T-6 Turbo Blanket — high-temp T6 blanket for large-frame turbos.
- BD Diesel 1453523 T6 Turbo Blanket (S400/S500) — custom fit with stainless springs.
- CPP NTPA/PPL-Legal Turbo Safety Blanket — competition-grade safety containment for sled pull/drag use.
Titanium Exhaust Wraps
- PPE 578001050 Titanium Wrap — 1" x 50' (tight bends, small sections).
- PPE 578002015 Titanium Wrap — 2" x 15' (downpipes & longer runs).
- Thermo-Tec 11023 — 2" x 100' Graphite Black (2000°F rating).
- Thermo-Tec 13150 Snap-Strap Kit — stainless ties for a clean, secure finish.
Clamp-On Pipe Shields
- Thermo-Tec 11624 — 2' x 6" Clamp-On Shield — great near the firewall, trans tunnel, or cab floor.
Adhesive Heat Tape & Barriers
- Thermo-Tec 13995 Heat Shield Tape — 2" x 50' — quick protection for hoses & looms.
- Thermo-Tec 13775 Gold Heat Barrier — 24" x 24" — reflective panel barrier for airboxes/firewall.
- Mishimoto MMGRT-235 Heat Defense Tape — metallized film tape for tight spots.
Heat Sleeves for Hoses & Wiring
- Thermo-Tec 14035-50 Sleeve — 50' (1"–1.5" I.D.) — slip-on radiant protection.
- PPE 578012501 Silicone-Coated Sleeve — 2.5" x 1' — extra abrasion resistance.
- Prioritize a turbo blanket and the first 2–3 feet of downpipe wrap to cut radiant heat fast.
- Use the clamp-on shield where the exhaust passes close to the cab/firewall.
- Add gold barrier on panels near the intake/airbox to keep charge air cooler.
- Protect rubber hoses and harnesses with sleeves where they run near the manifold or downpipe.
Related 13–18 Categories
Frequently Asked Questions
Will a turbo blanket help spool and lower under-hood temps?
Yes. Blanketing the turbine housing retains heat energy where it does work and reduces radiant heat to surrounding parts, which can improve spool and component life. See CPP T-3 and BD T6.
What wrap width should I use on the downpipe?
1" is ideal for tight bends and small sections; 2" covers downpipes and straighter runs faster. Examples: PPE 1" x 50', PPE 2" x 15', or Thermo-Tec 2" x 100'.
Where should I use adhesive gold barrier or tape?
On clean, flat panels (firewall, trans tunnel, airbox, intake tube) or to shield hoses/wires. Try Thermo-Tec 13775 and 13995 Tape.
Are clamp-on shields universal for 4" pipes?
Yes—flexible shields like Thermo-Tec 11624 can be trimmed/positioned to suit most 4" downpipes.
Do wraps need stainless ties?
Use stainless snap straps or clamps at the start and end of each section for a secure install.
Note: Race-only items (e.g., turbo safety blankets) are not street legal. Verify local regulations.
There are no products listed under this category.