null
BDS SUSPENSION

BDS SUSPENSION BDS1593H 6" RADIUS ARM LIFT KIT WITH NX2 SHOCKS 2011-2016 FORD F-250/350 6.7L POWERSTROKE 4WD

(No reviews yet) Write a Review
SKU:
BDS1593H
MPN:
BDS1593H
Shipping:
Calculated at Checkout
$3,478.14
724-785-4022

Description

Take your 2011-2016 Ford Super Duty F250 and F350 diesel truck to the next level with this 6-inch radius arm lift kit from BDS. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37" tires.

Up front the lift kit includes diesel-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets, and custom-tuned nitrogen charged shocks.

In the rear this kit utilizes a replacement GlideRide leaf springs with integrated overload leaf, u-bolts, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.

 

Pro-Ride Coil Springs

A pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

HD Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

BDS Glide-Ride Leaf Springs

Built to outperform, BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design where the main leaf pack is broken into two stages:

  1. First, the primary three leafs are functional with no additional load in the vehicle for excellent everyday ride quality. As moderate loads are applied, the secondary leafs are engaged.
  2. Second, if the truck is fully loaded, the bottom overload is engaged for maximum hauling capacity. This setup allows your truck to maintain ride quality unloaded without sacrificing payload.

Upgrading to BDS Glide-Ride leaf springs will reduce axle wrap and provide flexibility throughout the suspension cycle.

Features & Benefits

  • Easy, 100% Bolt-on installation
  • Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
  • Heavy duty tubular steel radius arms that correct caster while maximizing ground clearance
  • Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
  • Fabricated steel blocks provide level stance from front to rear
  • Standard NX2 Nitro shocks with vehicle-specific valving for better control
  • Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road

Recommended Tires & Wheels

(Trimming may be required)

  • 37 x 12.5 with 17 x 9 and 4.5 in. Backspace
  • 37 x 12.5 with 18 x 9 and 4.5 in. Backspace
  • 37 x 12.5 with 20 x 9 and 4.5 in. Backspace

Rear Lift Option

This lift system retains the factory rear blocks with the addition of the new BDS leaf springs to achieve a level stance. Choose the height of your factory lift blocks for proper u-bolt length.

Shock Option

NX2 Nitro Series

  • Nitrogen-charged
  • Twin-tube design
  • 10-stage velocity-sensitive valving
  • Dual-welded ends for increased strength
  • 1-3/8-inch high-flow piston
  • Self-lubricating seals
  • Silver powder coat finish

FOX 2.0 Performance Series

  • 2-inch Impact extruded aluminum body
  • Internal floating piston (IFP) monotube design
  • CNC machined 6061-T6 aluminum mounting ends
  • Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft
  • Race-developed high-flow piston design
  • Application-specific valving to maximize performance
  • Long-lasting clear anodized finish

IMPORTANT NOTES: 

  1. If equipped with a 2-piece driveshaft, a driveshaft alignment kit may be required.
  2. Although extremely rare, front driveline vibration may occur.
  3. If equipped with a rear sway bar, #123009 is required.
  4. U-bolts will not work on dually.

Est. Install Time :

8 hrs

Difficulty Level :

Moderate

Specialty Tools Needed :

Basic Hand Tools, Torque Wrench, Drill / Bit Set, Jack / Jack Stands, Pitman Arm Puller
 
SPECIFICATION: 
  • Front Lift Method : Coil Spring
  • Rear Lift Method : Leaf Spring
  • Shocks Included : Yes
  • Front Lift Height : 6"
  • Rear Lift Height : 4"
 
 
YearMakeModelSubmodelDrive TypeFuel TypePositionLift Height
2011 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2011 Ford F-350 Super Duty ALL 4WD DIESEL ALL ALL
2012 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2012 Ford F-350 Super Duty ALL 4WD DIESEL ALL ALL
2013 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2013 Ford F-350 Super Duty ALL 4WD DIESEL ALL ALL
2014 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2014 Ford F-350 Super Duty ALL 4WD DIESEL ALL ALL
2015 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2015 Ford F-350 Super Duty ALL 4WD DIESEL ALL ALL
2016 Ford F-250 Super Duty ALL 4WD DIESEL ALL ALL
2016 Ford F-350 Super Duty ALL 4WD DIESEL ALL ALL
 
 
 
 
 
 

Transform your 2011-2016 Ford F-250 or F-350 diesel truck into a true off-road powerhouse with the BDS SUSPENSION BDS1593H 6" Radius Arm Lift Kit. This comprehensive lift kit is engineered for those seeking enhanced performance, improved stance, and unmatched capability, enabling you to tackle diverse terrains with confidence while allowing for the installation of larger 37" tires.

The kit features diesel-specific Pro-Ride coil springs designed to deliver optimal lift height alongside a smooth, predictable ride. Heavy-duty tubular radius arms replace your factory components, ensuring robust performance while maintaining precise caster adjustment for improved handling and ground clearance. Steering dynamics are further optimized through a forged drop pitman arm and track bar bracket, effectively managing steering angles for enhanced control.

In the rear, the BDS GlideRide leaf springs incorporate a unique triple-stage design for improved ride quality and load management. This means your truck can maintain comfort even when fully laden, while significantly reducing axle wrap and providing exceptional flexibility. Complemented by NX2 Nitro or FOX Performance shocks, your suspension is fully equipped for both on-road and off-road adventures.

Installation is a breeze with a completely bolt-on design, requiring only basic hand tools and estimated at around eight hours to complete. Notable features include sway bar relocation, brake line brackets, and 100% vehicle-specific compatibility—ensuring everything works seamlessly with your F-250 or F-350.

For those aiming for an elevated driving experience, this lift kit is a must-have, combining rugged durability with sophisticated engineering. Elevate your truck’s capabilities and aesthetics; the BDS 6" Radius Arm Lift Kit is your entry point to a new realm of off-road excellence.
View AllClose

0 Reviews

View AllClose

Related Products

Related Products