BDS SUSPENSION BDS1597H 4" RADIUS ARM LIFT KIT WITH NX2 SHOCKS 2011-2016 FORD F-250/350 6.7L POWERSTROKE 4WD

Upgrade your 2011-2016 Ford F-250/350 6.7L Powerstroke 4WD with a BDS Suspension BDS1597H 4" Radius Arm Lift Kit With NX2 Shocks. These systems are built for improved all-around performance, capability, and comfort. At the heart of these kits are a pair of heavy-duty replacement radius arms built to withstand whatever abuse you can throw at them. Constructed from 1-3/4" OD -10GA DOM tubing with support gussets, these radius arms are far superior to the factory stamped steel units. They use a high clearance design for extra ground clearance and additional clearance of oversized tires. They incorporate factory style 3-1/4" rubber bushings to minimize road vibrations and allow for a long, maintenance-free bushing life. The arms bolt into the factory mounting points and utilize a lower cam slot to be used with the provided cam locks to correctly position the front axle and correct caster angle.

The additional height comes from a pair of full-length Pro-Ride coil springs. These springs are a direct bolt-in replacement, designed with the spring rate specific to the weight of either the diesel or gas engine while providing 4" of lift. These paired with BDS NX2 series gas shocks offer a smooth ride and improved control over rough terrain. To improve steering angles a forged drop pitman arm is supplied with an integrated drag link flip. Used in combination with the 1/4" thick heavy duty track bar drop bracket will position the front axle and keep the track bar angle in phase with the steering for improved handling. Also included for the front suspension are a pair of sway bar relocation brackets, bump stop extensions, brake line relocation brackets and a steering stabilizer mounting bracket.

In the rear, BDS provides their GlideRide rear leaf springs with integrated overload leaf for great all-around capability and limit any potential axle wrap. Rounding out these kits is a rear brake line bracket and matching rear NX2 gas shocks. As with all kits these include all hardware and step-by-step instructions to complete the installation. As with all BDS lift kits, this kit is backed by Factory Protection Plus for peace of mind wherever your adventures may take you. Factory Protection Plus includes BDS's exclusive No Fine Print Warranty along with a 5-year, 60,000-mile drivetrain warranty.

FEATURES:

• 4" Lift Kit

• Glide Ride Leaf Springs

• Bump Stop Extensions

• Sway Bar Drop Brackets

• Forged Drop Pitman Arm

• BDS Pro-Ride Coil Springs

• BDS NX2 Nitro Series Shocks

• Brake Line Relocation Brackets

• Heavy Duty Track Bar Drop Bracket

• High-Strength Tubular Radius Arms

• Steering Stabilizer Mounting Bracket

• Covered By The BDS "No Fine Print" Warranty

SUGGESTED WHEEL & TIRE COMBINATIONS

35x12.50 w/20x9 and 4.5" back spacing

35x12.50 w/18x9 and 4.5" back spacing

*trimming may be required

IN THE BOX

BDS1597H

NX2 Series - 6" Leaf Spring

KIT NOTES:

Removal of factory block required. 

Net rear lift height will vary depending on the height of the factory block but will result in a level stance.

If equipped with a 2-piece driveshaft a BDS driveshaft alignment kit (part #123402) may be required.

Although extremely rare front and/or rear driveline vibration may occur.

If equipped with a rear sway bar, BDS end link kit (part # 123009) is required.

U-bolts will not work on dually trucks.

KIT CONTENTS:

(2) BDS003629 - Ford F250/350 6in Rear Spring

(1) BDS013409 - 2011-2016 Ford F250/350 Rear Box Kit

(1) BDS013424 - 2011-2016 Ford F250/F350 4" Radius Arm Front Box Kit

(1) BDS033411 - 2005-2022 Ford F250/F350 Diesel 4in Coil Kit

(1) BDS123251 - 2005-2022 Ford F250/F350 Radius Arm Kit, Pair

(2) BDS85700 - Shock- 25.20 x 15.20 x 2-3/8 - S50/EB2

(2) BDS85760 - Shock- 33.00 x 19.25 x 2-3/8 - EB1/EB1

VEHICLE FITMENT