BDS SUSPENSION BDS1928H 2.5" RADIUS ARM LIFT KIT WITH NX2 SHOCKS 2011-2016 FORD F-250/350 6.7L POWERSTROKE 4WD

Upgrade your 2011-2016 Ford F-250/350 6.7L Powerstroke 4WD with a BDS Suspension 2.5" Radius Arm Lift Kit. These systems are built around massive tubular replacement radius arms. These arms are built to handle far more than the factory parts they are replacing. The design incorporates a factory style rubber bushing mount at the frame to keep the NVH levels in check. The 3-1/4" diameter bushings are huge and have a long, maintenance-free service life. The new radius arms mount right into the factory locations so installation is simple and clean. Alignment cam locks are included that allow for caster adjustability, something the factory arms do not provide. The arm geometry is set to keep the axle angle in the factory specs while compensating for the 2.5" of lift. A copper-anodized aluminum BDS name plate is mounted on each arm.

In addition to the heavy-duty, high-performance radius arms, this new system features dual-rate front coil springs that improve the ride and handling of these 3/4-ton trucks both on and off road. Our popular heavy-duty turnbuckle style adjustable track bar is included to center the axle. Front brake line relocation brackets included and a choice of NX2 series or FOX 2.0 Performance Series shocks are available. The rear system offers a selection of rear block options with an integrated bump stop wing to replace the factory 2" blocks, leveling out the back with the newly lifted front.

FEATURES:

• 2.5" Lift Kit

• Alignment Cam Locks

• Sway Bar Drop Brackets

• BDS Pro-Ride Coil Springs

• Brake Line Relocation Brackets

• High-Strength Tubular Radius Arms

• Choice Of Rear Lift Blocks (Or No Blocks)

• Turnbuckle Style Adjustable Front Track Bar

• Covered By The BDS "No Fine Print" Warranty

• Choice Of BDS NX2 Nitro Series Or Fox 2.0 IFP Performance Shocks

Note:

Some F-250/350's come equipped from the factory with a 3-3/4" rear block and do not require a rear block kit to achieve a more level stance. If a more tail high stance is preferred, choose the 5" rear block option.

SUGGESTED WHEEL & TIRE COMBINATIONS

35" x 12.50" w/17 x 9 and 5" back spacing

35" x 12.50" w/18 x 9 and 5" back spacing

35" x 12.50" w/20 x 9 and 5" back spacing

*trimming may be required

BDS1928H

NX2 Series

KIT NOTES:

Designed for Diesel model's w/o top mounted overload rear springs.

Models equipped with a 3-3/4" rear block from the factory do not require a rear block kit to achieve a more level stance.

For a more tail-high stance select 5" rear block option.

KIT CONTENTS:

(1) BDS013255 - 2011-2015 F250 2.5in Front Box Kit

(1) BDS033251 - 2005-2022 Ford Super Duty 2.5" Coil Spring Box Kit, Front Diesel, Pair

(1) BDS123251 - 2005-2022 Ford F250/F350 Radius Arm Kit, Pair

(2) BDS85660 - Shock- 29.80 x 17.60 x 2-3/8 - EB1/EB1

(2) BDS85713 - Shock- 23.5 x 14.2 x 2-3/8 - S50/EB2

VEHICLE FITMENT