BANKS 25995 BOOST TUBE KIT NATURAL FINISH TUBES FOR 13-18 CUMMINS 6.7L 24V

Increase hot side flow area up to 103 percent over the stock 2-3/4 inch boost tubes with Banks' huge 3-1/2 inch OEM left and right side boost tubes. Stock hot side tube is dented at the factory, bringing it's diameter down to a tiny 2-1/4 inch. Banks boost tubes are 3-1/2 inch constant diameter mandrel bent with larger radius bends. More air allows for more fuel which means more horsepower.

Banks hot and cold side tubes have up to 103 percent greater flow area than stock tubes. Produced from high-quality aluminized steel, the tubes are mandrel bent and constant diameter. This allows for quicker turbo spool. Better flowing intercooler tubes improve retention of boost pressure (increases density) between turbo, intercooler, and intake resulting in maximum horsepower. Our red powder-coat finish stops before the end of the tubes for better grip ensuring our 4- and 5-ply heavy-duty high-temperature silicone couplers hold tight under high-boost conditions. Spring-loaded constant tension clamps maintain a stronger grip to prevent leaks or blown boots.

Looking for the ultimate flow increase? Banks Boost-Tubes are larger than the factory pipe and designed to work with not only the stock elbow but also the new Banks Monster-Ram Gen 2 which will improve airflow, and allow the turbocharger to spool up even faster.

Key Features

• Works with stock or aftermarket intercooler with stock in/outlet size and location
• 103 percent Greater hot side flow area than stock (3.5 in vs 2.25 in)
• 67 percent Greater cold side flow area than stock (3.5 in vs 2.75 in)
• Combine with Banks Monster Ram Gen 2 for the most power
• Designed to give you a greater cooling capacity
• Mandrel-bent aluminized steel construction
• Constant diameter tubing for the best flow
• 4- and 5-ply heavy-duty silicone couplers
• Spring-loaded constant tension clamps
• Increase performance and lower EGTs
• Natural finish, ready for paint
• Perfect fit and finish

Enhance the performance of your 2013-2018 Cummins 6.7L 24V engine with the Banks 25995 Boost Tube Kit in a sleek natural finish. Boasting a significant up to 103% increase in hot side flow area compared to stock boost tubes, this kit features Banks' 3-1/2-inch OEM left and right-side boost tubes. Say goodbye to the restrictive stock hot side tube, which is crimped down to a mere 2-1/4 inches at the factory. The Banks boost tubes are designed with a consistent 3-1/2-inch diameter, mandrel bent with larger radius bends to facilitate better airflow and turbo spooling.

Crafted from high-quality aluminized steel, these tubes deliver exceptional durability and flow capacity, making turbo spooling quicker. The improved flow area of both hot and cold side tubes, coupled with the mandrel-bent constant diameter construction, ensures maximum horsepower gains. The red powder-coat finish not only adds a touch of style but also enhances grip, effectively securing the heavy-duty high-temperature silicone couplers even under high-boost conditions.

Complement your setup with the Banks Monster-Ram Gen 2 for unparalleled airflow improvements, leading to faster turbocharger spooling. Engineered to work seamlessly with both stock and aftermarket intercoolers, the Banks 25995 Boost Tube Kit offers a perfect fit and finish. Enjoy the benefits of a greater cooling capacity, reduced exhaust gas temperatures, and increased performance with this exceptional upgrade. Invest in this kit for an unparalleled boost in power and efficiency.