XDP XD321 3/8 INCH STREET PERFORMANCE PUSHRODS FOR 94-03 FORD SUPERDUTY WITH 7.3L POWERSTROKE ENGINE

Eliminate the weak link in the valvetrain of your 1994-2003 Ford 7.3L Powerstroke with the XDP Pushrods 3/8 inch Street Performance XD321. The factory pushrods in your 7.3L are almost 10.25 inch long and cannot stand up to the stress of a modified engine.

Increased valve spring pressures, cylinder pressures, and increased engine RPM can quickly max out the capabilities of your stock pushrods causing flex that leads to valvetrain damage and power loss.

This flex is not visible to the naked eye and while your factory pushrods won't show signs of failure, it does not mean that you should not replace them for a stronger component. The XD321 Pushrods are manufactured to XDP's stringent standards.

Expertly handcrafted with only the highest quality materials, the 3/8 inch Street Performance Pushrods are made from a seamless 4130/4135 chromoly tubing that is cold drawn over a mandrel for increased rigidity and flex reduction.

The tips are manufactured from a core hardened and triple tempered 86L20 bar stock for maximum impact and wear resistance. This combination of manufacturing processes and materials results in a stronger pushrod giving you a quality component that helps to maximize valvetrain performance. Sold as a set.

Features:

• Supports 750HP+
• 170,000 PSI Tensile Strength
• 4130/4135 Chromoly Construction
• 3/8 inch x .095 inch, 10.240 inch Overall Length

Installation Note: These Pushrods are a direct replacement for the factory pushrods in your engine. Please consult the factory service manual for removal, installation and valve adjustment instructions.

Elevate the performance and reliability of your 1994-2003 Ford Super Duty 7.3L Powerstroke engine with the XDP XD321 3/8 Inch Street Performance Pushrods. Designed specifically to address the shortcomings of factory pushrods, these high-performance components eliminate the inherent weaknesses in the valvetrain that often lead to power loss and engine damage under high-stress conditions.

Factory pushrods can struggle to cope with increased valve spring pressures, cylinder pressures, and higher RPMs commonly found in modified engines. This stress can lead to flex and ultimately failure, but with the XD321 Pushrods, you can trust in superior strength and durability. Handcrafted to meet XDP’s exceptional standards, each pushrod is constructed from seamless 4130/4135 chromoly tubing that has been cold drawn over a mandrel to enhance rigidity and reduce flex.

The tips of these pushrods are manufactured from core hardened and triple tempered 86L20 bar stock, providing unparalleled impact and wear resistance. This meticulous design results in pushrods that not only support over 750 horsepower but also feature an impressive tensile strength of 170,000 PSI. With an overall length of 10.240 inches and a diameter of 3/8 inch, these pushrods are a direct replacement for your factory units, ensuring a seamless installation process.

Offering a crucial upgrade for any performance-minded enthusiast, the XDP XD321 Pushrods are more than just components; they're a vital investment in optimizing your engine's performance and longevity. Sold as a complete set, you can take your engine to the next level with confidence and peace of mind.