Product Description
Synergy Jeep JK 3 Inch Lift Stage 1.5 Suspension System increases the lift height to 3 inch with our 3 inch Progressive Coil Springs and takes full advantage of our Raised Rear Track Bar Bracket and Front Steering Correction Kit (8011) for optimal steering and suspension geometry. With the steering corrected for 3 inch of Lift this system will drive as good, if not better, than stock. This system will fit 35 inch tires with stock fenders or 37 inch tires with high fenders.
Details:
- Fits 07-18 Jeep Wrangler Unlimited JK 4-Door
- Stage 1.5 key features are front and rear track bar relocation brackets and flipped drag link
- Front and rear bump stop extension kits
- Rear sway bar links so the factory rears can be used in the front
- Front and rear brake line relocation kits
- Synergy double adjuster sleeve pinch bolt assembly allows for adjustment of control arm, track bar, tie rod, and drag link length without removal
- Front and rear track bar relocation brackets raise track bar mounting positions increasing suspension roll center heights which improves handling on and off road
- Control arm cam bolt kit to correct caster
- Progressive wound coil spring manufactured using the latest in CNC hot winding technology keeps spring from coming unbound at full suspension droop
- Suspension components feature an abrasion-resistant Powdercoat finish for maximum durability and corrosion resistance
- 100 percent bolt on components assure an easy, trouble free installation with the use of basic hand tools
- Requires a maximum 4-3/4 inch backspace wheel or wheel spacer with factory wheel setup. 4-1/2 inch back spacing is recommended
- Synergy suspension systems are a modular design so all components are available separately
Notes:
- 2012+ JK's lifted over 2 inch will require exhaust spacers (5017), or a front aftermarket drive shaft to prevent interference with the exhaust.
- 3 inch and up lifts, aftermarket driveshafts are recommended
- Springs are designed to provide the advertised amount of lift with use of aftermarket bumpers, wInch tire carriers. More lift will occur on vehicles in stock trim.
- Springs retain the factory rake of the vehicle where the rear is higher than the front. Vehicle should sit level when loaded. Request one size shorter rear springs to level the vehicle out when unloaded.
- Requires 16 inch or larger wheel diameter
DETAILED FITMENT:
- 2007-2010 Jeep Wrangler X
- 2007-2017 Jeep Wrangler Unlimited Rubicon
- 2007-2017 Jeep Wrangler Rubicon
- 2007-2010 Jeep Wrangler Unlimited X
- 2007-2017 Jeep Wrangler Sahara
- 2007-2017 Jeep Wrangler Unlimited Sahara
- 2010-2017 Jeep Wrangler Unlimited Sport
- 2010-2017 Jeep Wrangler Sport
- 2011-2011 Jeep Wrangler 70th Anniversary
- 2011-2011 Jeep Wrangler Unlimited 70th Anniversary
- 2016 Jeep Wrangler 75th Anniversary
- 2016 Jeep Wrangler Sport S
- 2016 Jeep Wrangler Unlimited Sport S
- 2016 Jeep Wrangler Unlimited 75th Anniversary
- 2018 Jeep Wrangler JK Unlimited Rubicon
- 2018 Jeep Wrangler JK Sport
- 2018 Jeep Wrangler JK Unlimited Sahara
- 2018 Jeep Wrangler JK Sahara
- 2018 Jeep Wrangler JK Unlimited Sport
- 2018 Jeep Wrangler JK Rubicon
Transform your 2007-2018 Jeep Wrangler JKU with the SYNERGY 8045-30 3.0 Inch Lift Stage 1.5 Suspension System, designed to enhance both performance and aesthetics. With its advanced suspension technology, this system elevates your ride with 3-inch Progressive Coil Springs, providing noticeable improvements in off-road capability and on-road handling.
The SYNERGY lift system ensures optimal suspension geometry and steering with the inclusion of raised rear track bar brackets and a front steering correction kit. Experience a smarter, more responsive driving experience that rivals stock configurations, all while accommodating up to 35-inch tires with stock fenders or 37-inch tires with high fenders.
- Fits 07-18 Jeep Wrangler Unlimited JK 4-Door models.
- Features front and rear track bar relocation brackets and a flipped drag link for enhanced stability.
- Includes front and rear bump stop extension kits to maintain suspension integrity.
- Rear sway bar links for using factory rear components in the front.
- Brake line relocation kits to optimize safety and performance.
- Double adjuster sleeve pinch bolt assembly for easy adjustments.
- Powdercoat finish on suspension components ensures maximum durability.
- 100% bolt-on components for hassle-free installation with basic tools.
Elevate your off-road adventures and experience supreme handling with the SYNERGY 8045-30 Suspension System. Give your Jeep the upgrade it deserves and conquer any terrain with confidence!
