Product Description
S&S Diesel 6.7C19-200SAC-SET is a brand-new 200% over injector set engineered for the 2019–2024 Ram 2500/3500 6.7L Cummins 24V. Built on new bodies with SAC nozzles and matched to OE-level tolerances, these injectors support serious airflow, larger turbos, and elevated rail demand while maintaining precise rate-shape control.
Why This Set
- Proprietary nozzle honing for clean, consistent holes.
- Nozzles flow-matched to ~1% per set; injectors flow-matched to ~3% per set.
- Calibrated across multiple pressure/energizing points with aligned injection rate shape.
- All sizes feature internal body modifications for improved injection profile; 200% size supports high-fuel builds.
- Brand-new bodies only—no core wear variables.
Fitment
- 2019–2024 Ram 2500/3500 with 6.7L Cummins 24V (standard & high output trims).
What’s Included
- (6) S&S Diesel 6.7C19-200SAC-SET injectors (new bodies, 200% over SAC nozzles)
- Set is flow-matched and bench-validated
Recommended Supporting Parts
- 2019–2024 Cummins CP3 Conversion Pumps & Kits – stabilize rail supply for high-flow injectors.
- 6.7L Cummins Injectors, Kits & Accessories – seals, lines, and install hardware.
- CPP SRWS Remote Water Separator – additional water separation to protect the HP system.
- CPP SRFF Remote 3-Micron Fuel Filter – finer filtration for longevity under high demand.
Helpful Notes
- 200% over injectors are intended for builds with ample air (turbo/s) and proper low-pressure/HP fuel supply.
- Professional installation and injector coding recommended.
FAQ
Are these genuine S&S injectors with new bodies?Yes. This 2019+ 6.7C set is built on brand-new bodies and calibrated with SAC nozzles, not reman cores.
Do I need a CP3 conversion with 200% injectors?At this size, we strongly recommend upgrading supply and high-pressure capability. Start with a CP3 conversion/pump and ensure adequate lift pump and filtration.
Will these work on both SO and HO 6.7 Cummins (2019–2024)?Yes—this set covers 2019–2024 Ram 2500/3500 6.7L applications (standard and high output). Verify your build goals and supporting mods before installation.
Are the injectors flow-matched as a set?Yes. S&S matches nozzles to ~1% variance and complete injectors to ~3% variance per set, then verifies multi-point performance on calibrated equipment.
What tuning is required?Custom calibration is recommended to fully leverage 200% injectors while maintaining drivability, rail control, and emissions-compliant use where applicable.
