PPE 515403005 4.0 INCH TO 3.0 INCH X 5 INCH L 6MM 5-PLY REDUCER

Drag racing and sled pulling places huge stress on your trucks silicone hoses in a very short period of time. >PPEs hoses were designed to handle the rigors of increased pressure during racing and competition. They are equally proficient at daily driving and towing heavy loads.

Each PPE Performance Silicone Hose is strengthened with 5 plies of polyester reinforced fibers making them very tough. The Fluorocarbon lining offers better lubricity (slippery and resistant to chemicals) and the silicone rubber construction ensures that they can withstand constant boost pressures from -76 degrees all the way to plus 437 degrees Fahrenheit. In short, PPE Performance Silicone Hoses will not blow out like a stock hose will.

>PPEs Silicone Hoses are resistant to fuel, oil and chemicals while also being UV and Ozone resistant. These hoses can handle the extreme exposure that heavy usages puts upon them. With multiple sizes and configurations, there is a PPE Performance Silicone Hose for every design application.
Features:

• 4 Inch To 3.0 Inch ID x 5 Inch Long Performance Silicone Reducer - Straight (515403005)
• Handles high-boost pressures
• Working pressure: 70 psi - Bar 4.8
• Burst pressure: 207 psi - Bar 14.3
• Higher flow and better lubricity than rubber
• UV and Ozone resistant
• Fluorocarbon lining resistant to oil, fuel and high temperatures
• 6mm wall thickness 5-ply
• Black with PPE Logo
• Sold Individually

Note:

• Due to the 6mm wall thickness of PPE Silicone, hose clamps must be 1/2 inch larger diameter than hose ID for proper fit

PPE Performance 4.0 Inch to 3.0 Inch x 5 Inch L 6MM 5-Ply Reducer is engineered for durability and performance, making it the ultimate choice for both serious racers and everyday drivers. Designed to withstand the intense pressures of drag racing and sled pulling, these silicone hoses do not compromise on reliability even during heavy towing.

Constructed with 5 plies of polyester reinforced fibers, the PPE silicone hose offers exceptional toughness and longevity. The innovative Fluorocarbon lining provides better lubricity and makes the hose resistant to damaging chemicals, ensuring optimal performance under varying conditions. This silicone hose has been rigorously tested to endure extreme temperatures from -76°F up to 437°F, far exceeding the limitations of standard rubber hoses.

• 4 Inch To 3.0 Inch ID x 5 Inch Long Performance Silicone Reducer - Straight (515403005)
• Handles high-boost pressures with ease
• Working pressure: 70 psi - Bar 4.8
• Burst pressure: 207 psi - Bar 14.3
• Higher flow and superior lubricity compared to rubber
• UV and Ozone resistant for prolonged durability
• Fluorocarbon lining resistant to oil, fuel, and high temperatures
• 6mm wall thickness with a robust 5-ply construction
• Stylish black finish featuring the PPE logo
• Sold individually to suit various application needs

Elevate your vehicle's performance and reliability with PPE's Silicone Hoses, the clear choice for enthusiasts and professionals alike. Remember, for the best fit, use hose clamps that are 1/2 inch larger than the hose ID due to the thick wall construction.