PPE 128052000 ALLISON TRANS PAN STANDARD DEPTH-RAW FOR 01-10 GM 6.6L DURAMAX LB7/LLY/LBZ

Replace the stock, stamped metal pan with one that will help keep your transmission cool and protected.

Cast from high-grade aluminum alloy and holding stock fluid capacity, it is only 5 inches Deep making this pan perfect FOR those who like their rides lowered to the ground and still running cool. Thanks to the 3/4 inch external cooling fins, the fluid will run much cooler than the stock pan.

The PPE pans are tough, too! Thanks to its thick cast construction with external fins and the additional side ribbing, all PPE Transmission Pans are much stronger than the stock units.

Each pan is equipped with 1/8 inch and 1/4 inch NPT threaded ports FOR easy installation of gauge sensors as well as one of >PPEs Neodymium magnet equipped 17mm hex head drain plug. The Neodymium magnet is an insanely strong magnet that attracts and holds harmful ferrous metal particles.

New zinc-plated Allen head mounting hardware is supplied. The PPE Standard Profile Aluminum Transmission Pan is perfect FOR hot rod or marine applications.

Covered by a lifetime warranty.
Features:

• Standard Profile Aluminum Transmission Pan - GM Allison 1000/2000/2400 - Raw Finish (128052000)
• 3/4 inch external cooling fins reduce oil temps
• Robust side ribs provide additional strength
• 1/8 and 1/4 inch NPT threaded ports FOR gauge sensors
• High-strength Neodymium magnet equipped 304 stainless steel drain plug with reusable Viton O-Ring
• Retains use of high-quality original Allison pan gasket
• M8 x 1.25 x 30mm Allen head bolts
• Lifetime warranty
• Sold As A Kit

Applications:

• GMC and Chevy 2001 to present model year GM Allison Transmissions

Note:

• Available in 3 finishes:
• Raw (128052000) - Brushed (128052010) - Black (128052020)

The PPE 128052000 Allison Trans Pan Standard Depth-Raw is a premium upgrade FOR GM 6.6L Duramax LB7/LLY/LBZ transmissions from 2001 to 2010. Crafted from high-grade aluminum alloy, this transmission pan replaces the stock stamped metal unit, providing superior cooling and protection FOR your vehicle's vital transmission components. With a depth of just 5 inches, it’s designed FOR those who prefer a lowered stance without sacrificing performance, ensuring that fluid temperature stays within optimal ranges thanks to the innovative 3/4 inch external cooling fins.

Durability is a hallmark of the PPE pan, featuring a thick cast construction rein FORced with robust external fins and additional side ribbing. This design not only enhances strength but also ensures long-lasting performance under the most demanding conditions. Tailored FOR hot rod or marine applications, the pan maintains stock fluid capacity while delivering exceptional heat dissipation.

Installation is straight FORward, thanks to the inclusion of 1/8 inch and 1/4 inch NPT threaded ports that facilitate the easy attachment of gauge sensors. The pan also comes equipped with a high-strength Neodymium magnet integrated into the 17mm hex head drain plug, effectively capturing harmful ferrous metal particles to prolong transmission life.

Australian made, the PPE Standard Profile Aluminum Transmission Pan is supplied as a complete kit with zinc-plated M8 x 1.25 x 30mm Allen head mounting hardware, retaining compatibility with high-quality original Allison gasket seals. Available in three finishes—Raw, Brushed, and Black—this product is not just a part; it’s an enhancement backed by a lifetime warranty, ensuring peace of mind alongside a performance boost. Upgrade your transmission protection today with the PPE 128052000 pan.