Product Description
Restore and upgrade your 7.3L with the INDUSTRIAL INJECTION ABPSR3 230cc remanufactured performance injector. Precision-built and flow-tested for consistent delivery, this 230cc unit supports higher horsepower with proper tuning and fuel supply while maintaining reliable street manners when configured correctly.
Fitment
- 1997–1999 Ford F-250 / F-350 7.3L Power Stroke (early-’99 included)
- Direct-fit replacement for factory HEUI injectors (tuning & supporting mods recommended)
What’s Included
- (1) Remanufactured 230cc HEUI injector (ABPSR3), o-rings/seals pre-installed
- Flow sheet / calibration data (where supplied by manufacturer)
Key Features
- 230cc performance volume to support significant power increases with proper nozzles/tuning
- Remanufactured & bench-tested for balanced flow rates and smooth idle
- OE-style electrical connector for plug-and-play installation
- Premium seal kit installed for long service life
Recommended Parts (CPP Internal Links Only)
- Shop All 7.3L Power Stroke Parts
- 7.3L Fuel Injectors & O-Ring Kits
- High-Pressure Oil Pumps (HPOP) & Upgrades
- Lift Pumps & Complete Fuel Systems
- Custom Tuning / Programmers for 7.3L
- Injector Harnesses & Under-Valve-Cover Pigtails
Install & Core Notes
- Professional installation recommended—verify injector codes and cylinder assignment.
- Use clean engine oil and fuel during priming; replace failed/contaminated components before install.
- Core charge may apply—return acceptable cores promptly for credit. Inspect our store policy for specific core return requirements.
FAQ
Is this injector sold individually or as a set?This ABPSR3 listing is for one (1) reman injector. For a full refresh, order quantity eight (8). If you need a matched set, contact us for a set-priced bundle.
Do I need custom tuning for 230cc injectors?Yes—custom tuning is strongly recommended to optimize idle quality, drivability, and power while controlling EGTs and smoke.
What supporting mods are recommended?A healthy or upgraded HPOP, adequate lift pump/fuel system, good ICP/IPR control, and free-flowing intake/exhaust are recommended. Verify injector o-rings and UVCH connectors during install.
Will these work on late-1999–2003 trucks?This ABPSR3 listing targets 1997–1999. For late-’99–2003 applications, see our other 7.3L injector options or contact us for guidance.
