Product Description
Overview
The Industrial Injection PhatShaft 62 (P/N 3622306811) is a proven drop-in performance turbo for the 1994–2002 Dodge Ram 2500/3500 5.9L Cummins. Built around a 62mm compressor with a durable 14cm² turbine housing, it delivers quick spool-up, lower EGTs, and towing-friendly drivability—while leaving room for future power upgrades.
Why Choose the PhatShaft 62?
- Stronger midrange & cooler EGTs: Ideal for daily driving, towing, and light performance builds.
- Reliable Hardware: Journal bearing center section and robust turbine housing engineered for longevity.
- Clean, bolt-on fitment: Designed for the factory-style T3 2nd-gen 5.9L Cummins configuration.
Fitment
- 1994–1998 (12-valve) Dodge Ram 2500/3500 5.9L Cummins
- 1998.5–2002 (24-valve) Dodge Ram 2500/3500 5.9L Cummins
- T3 footprint; stock-location style installation. Some trucks may require supporting parts listed below.
Recommended Supporting Parts
- Turbo install & gasket kit (oil feed/return gaskets, hardware)
- High-temp compressor outlet boot & clamps
- Industrial Injection 995L6-0588 5" Marmon Clamp (downpipe connection, where applicable)
- Fresh air intake/tube upgrade for improved flow
- EGT gauge/pyrometer to monitor temps under load
Specs
- Brand/Series: Industrial Injection PhatShaft
- Part Number: 3622306811
- Compressor Inducer: 62mm
- Turbine Housing: 14cm²
- Mounting: Stock-style T3 (2nd-gen Cummins)
- Use Case: Daily driver, towing, light performance
FAQ
Q: Do I need custom tuning?
A: Not strictly required for a stock-fuel truck, but calibration and proper boost control can maximize performance and EGT control.
Q: Will it tow better than stock?
A: Yes—this 62mm setup is popular for cooler EGTs and stronger midrange while maintaining drivability.
Q: What supporting parts are recommended?
A: At minimum, fresh gaskets, quality clamps, and good boots. See our recommended parts above to simplify installation and improve reliability.
Q: Emissions notice?
A: Ensure all modifications comply with your local, state, and federal laws.
Specification Chart
| Brand | Industrial Injection |
| Series | PhatShaft 62 |
| Part Number | 3622306811 |
| Compressor Inducer | 62mm |
| Turbine Housing | 14cm² |
| Fitment | 1994–2002 Dodge Ram 2500/3500 5.9L Cummins |
| UPC | TBD |
| GTIN | TBD |
| Prop 65 | Yes — Cancer and Reproductive Harm — www.P65Warnings.ca.gov |
