Product Description
Industrial Injection 0986435519SE-R1 Reman Injector — 2007.5–2010 Dodge Ram 6.7L Cummins Cab & Chassis — 100HP
Built on genuine Bosch architecture and remanufactured by Industrial Injection, the R1 (100HP) injector is calibrated and flow-matched for 2007.5–2010 6.7L Cummins Cab & Chassis applications (Ram 3500/4500/5500 C&C). It delivers a mid-range performance bump while maintaining clean idle and OE-style drivability.
Fitment
- 2007.5–2010 Dodge Ram 6.7L Cummins Cab & Chassis (C&C) — 3500/4500/5500
- Direct replacement for Bosch 0986435519 (C&C spec)
What’s Included
- (1) Industrial Injection 0986435519SE-R1 reman injector (R1 / ~100HP increase)
- Pre-installed seals and washer (as supplied by manufacturer)
Specifications
Manufacturer | Industrial Injection |
---|---|
Part Number | 0986435519SE-R1 |
Base Injector (Bosch) | 0986435519 (Cab & Chassis) |
Advertised Gain | ~100 HP (R1) |
Nozzle/Flow | Honed & balanced, ≈33 LPM class |
Fuel System | Common-Rail (CR) |
Vehicle Platform | 2007.5–2010 Ram 6.7L Cummins Cab & Chassis |
Warranty | Manufacturer warranty (see product policy) |
UPC (Bosch Base) | 047026516647 |
Industrial Injection Barcode | II2163000205 |
Recommended Parts (Internal Links)
- 6.7L Cummins Injectors, Kits & Accessories
- Connector Tube Set (07.5–22 6.7L) — always replace tubes when installing injectors.
- 07.5–12 6.7L Fuel System Components — lines, filters, rails, and supporting hardware.
Install Notes
- Clean, contamination-free fuel system is critical to injector life.
- Use new connector tubes on install; torque per service data.
- Program/bleed per OE procedure; verify C&C calibration.
FAQ
Is this injector for pickup or Cab & Chassis?This part targets Cab & Chassis models (Ram 3500/4500/5500). Verify VIN/engine code for C&C before ordering.
Do I need new connector tubes?Yes—replacing connector tubes is strongly recommended to avoid sealing/contamination issues. See our 6.7L tube set linked above.
How much additional flow does the R1 provide?The R1 is an ~100HP class injector; sellers list ≈33 LPM honed flow for this calibration class.
Is tuning required?Most Cab & Chassis applications run well on stock programming with this R1. For optimized results with other mods, consult your tuner.
Core and warranty?Manufacturer core and warranty policies apply (see cart/policy). Return old units promptly and keep proof of purchase.