HAMILTON CAMS

HAMILTON CAMS 07-B-001 BILLET VALVE BRIDGES FOR 98.5-18 CUMMINS 5.9L 24V ENGINE

Elevate your Dodge Ram truck's performance with the Hamilton Cams 07-B-001 Billet Valve Bridges, expertly designed for the 98.5-18 Cummins 5.9L 24V engine. Crafted using a sophisticated forging process, these valve bridges offer unparalleled grain...

HAMILTON CAMS 07-s-002 12V DUAL VALVE SPRING SET FOR 89-98 CUMMINS 5.9L 12V

There comes a point as rpm, valve lift, spring pressures and valve size increase, that a single spring is no longer up to the task of controlling the valves. This is when it is time to use a dual spring. Our springs are made in the USA. They come with...

HAMILTON CAMS 07-s-001 165# BEEHIVE VALVE SPRINGS FOR 89-98 CUMMINS 5.9L 12V

Seat Pressure 165 lbs, comes with retainers and locks. Optional locks are available for .075″ higher installed height If you are over 30lbs of boost/drive pressure or over 3500rpm with your 12valve, you are experiencing a few negative things...

HAMILTON CAMS 07-CC-24V188 CAST 188/220 CAMSHAFT COMBO FOR 98.5-18 CUMMINS 5.9L/6.7L 24V

What’s included: 188/220 Camshaft (fits 89-2018 Cummins) Heavy duty pushrods (oem-3000 hp) 103 Valve Springs Lifters/tappets Information: RPM Range: 1700-4500 Drops EGT 200-300 Increased Mid Range power Duration at .050″ of...

HAMILTON CAMS 07-s-004 STEEL TOOL RETAINERS FOR 98.5-18 CUMMINS 24V 5.9L/6.7L

If you are running over 4,500 rpm and have a cam with large lobe lift, then these retainers are a must. Over 4,500 can only be run with our #110 springs

HAMILTON CAMS 07-S-110 COMPETITION 110# VALVE SPRING SET FOR 98.5-24 CUMMINS 5.9L/6.7L 24V

24 Valve Competition Springs 110LB seat pressure. Good to 6,500 RPM A must when running your engine over 4500rpm -we suggest steel cam and tappets to combat premature cam wear that is possible with cast cams -we do not suggest these springs for daily...

HAMILTON CAMS 07-C-220/240 STEEL 220/240 CAMSHAFT FOR 89-18 CUMMINS 5.9L/6.7L

The HAMILTON CAMS 07-C-220/240 220/240 STEEL CAM FOR 89-2018 Cummins 5.9L and 6.7L engines is a high-performance camshaft designed for engines operating in the 3,500-5200rpm range, particularly those equipped with excellent flowing heads. This camshaft...

HAMILTON CAMS 07-H-002 LARGE VALVES FOR 89-98 5.9L CUMMINS 12V

45 degree 1.850″ intake and 45 degree 1.750″ exhaust. When machining valve seat on OEM head to fit these larger valves, make sure you set valve face at .055″ from cylinder head surface. Increase flow, increase swirl, increase power...

HAMILTON CAMS 07-CC-24V178 CAST 178/208 CAMSHAFT COMBO FOR 98.5-18 CUMMINS 5.9L/6.7L 24V

What’s included: 178/208 Camshaft (fits 89-2018 Cummins) Heavy duty pushrods (oem to 3000 hp) 103 Valve Springs Lifters/tappets Information: RPM Range: Idle-4000 Drops EGT 200-300 Increased bottom end power Quicker spool...

HAMILTON CAMS 07-c-178/208 CAST 178/208 CAMSHAFT FOR 89-18 CUMMINS 5.9L/6.7L

Information: RPM Range: Idle-4,000 Drops EGT 200-300 Duration at .050″ of lift  178 Intake, 208 Exhaust .290 intake lift .310 exhaust lift Warranties will not be considered unless you use Hamilton cams Tappets and springs Addition...

HAMILTON CAMS 07-CC-12V188 CAST 188/220 CAMSHAFT COMBO FOR 89-98 CUMMINS 12V 5.9L

The Hamilton Cams 07-CC-12V188 Cast Camshaft Combo is a powerhouse upgrade for your Cummins 5.9 engine. Crafted with precision and performance in mind, this camshaft combo is tailored to elevate your 12v Cummins system to new heights. The 188/220 cast...

HAMILTON CAMS 07-C-188/220S STEEL 188/220 CAMSHAFT FOR 89-18 CUMMINS 5.9L/6.7L

Information: RPM Range: 1700-4500 Drops EGT 200-300 Increased Mid Range power Duration at .050″ of lift  188 Intake, 220 Exhaust We only offer warranty on our cams if our lifters and springs are used.   Modification...

HAMILTON CAMS 07-CC-12V178 CAST 178/208 CAMSHAFT COMBO FOR 89-98 CUMMINS 12V 5.9L

We are pleased to announce that the 178-208 has just passed a round of Federal emission tests and is 49 state compliant! Sorry California, you are not one of the 49 states.   What’s included: 178/208 Camshaft (fits 89-2018 Cummins) Heavy...

HAMILTON CAMS 07-c-188/220 CAST 188/220 CAMSHAFT FOR 89-18 CUMMINS 5.9L/6.7L

Information: RPM Range: 1700-4500 Drops EGT 200-300 Increased Mid Range power Duration at .050″ of lift  188 Intake, 220 Exhaust We only offer warranty on our cams if our lifters and springs are used. 108LSA   Modification...

HAMILTON CAMS 07-T-002 DLC COATED 1.45" BILLET TAPPETS FOR 89-18 CUMMINS 5.9L/6.7L

1.45″ steel tappets for high rpm engines with 110# or heavier valve springs

HAMILTON CAMS 07-P-002 EXTREME DUTY PUSHRODS FOR 89-98 5.9L CUMMINS 12V

If you are over 500hp with your 6bt, the cylinder pressures dictate that you step up to our extreme duty pushrods which consist of a 10.5mm .120″ wall. OEM pushrods have a buckling strength of 1780lbs these pushrods have a buckling strength of...

HAMILTON CAMS 07-T-001 1.45" TAPPETS SET FOR 89-18 CUMMINS 5.9L/6.7L

These tappets work with all 1989-2016 Dodge Cummins engines. At 1.45″ they will not have interference with the Fuel pump eccentric on 12v engines and are much wider than the 1.1″ tappets used in early 12v engines. This means they have more...

HAMILTON CAMS 07-C-001 ZINC ADDITIVE FOR CAMSHAFT BREAK-IN

With most current diesel oils this additive will put your zinc and phosphorous at approximately 1500-1650ppm which is ideal for flat tappets cams. Use every oil change in competition engines, at least for break-in on daily drivers.

HAMILTON CAMS 07-P-004 EXTREME DUTY 12MM PUSHRODS FOR 98.5-18 5.9L/6.7L CUMMINS 24V

If you are over 500hp, the cylinder pressures acting on the valve can bend your OEM pushrods before the valve opens. This can retard cam timing and reduce valve lift These pushrods are a 3 piece design that features 12mm diameter .120″ wall, which...

HAMILTON CAMS 07-C-188-220 CAST CAM 188/220-109LSA FOR 89-18 CUMMINS 5.9L/6.7L

Information: RPM Range: 1700-4500 Drops EGT 200-300 Increased Mid Range power Duration at .050″ of lift  188 Intake, 220 Exhaust We only offer warranty on our cams if our lifters and springs are used.   Modification...

HAMILTON CAMS 07-C-RETAINER BOLT ON BRONZE CAM RETAINER FOR 89-07 CUMMINS 5.9L 12V/24V

The HAMILTON CAMS 07-C-RETAINER Bolt-On Cam Retainer is a high-quality product designed specifically for the 89-07 Cummins 5.9L 12V/24V engines. This product serves as a factory replacement for the thrust plate retainer, ensuring a reliable and efficient...

HAMILTON CAMS 07-C-002 BOLT-ON CAM RETAINER FOR 89-18 5.9/6.7L CUMMINS 12V/24V

For use with mechanically injected engines with helical cut cam gears. The bolt on retainer will ensure that the cam gear is not pushed off of the cam in high rpm, high fuel delivery situations. Use red loc-tite and torque bolt to 44 ft-lbs Common rail...

HAMILTON CAMS 07-S-003 103# VALVE SPRINGS FOR 98.5-24 CUMMINS 5.9L/6.7L 24V

Stock  24v springs have 78-82lbs of seat pressure at 1.380″. If you are over 35psi(boost or drive pressure), stock springs do not fully control the valvetrain. Intake and exhaust valves can be blown open by boost and exhaust drive pressure...