FLEECE FPE-351-1317 2013-2017 CUMMINS 63MM FMW HOLSET VGT CHEETAH TURBOCHARGER

Unlock the true potential of your 2013-2017 6.7L Cummins with the FLEECE FPE-351-1317 63MM FMW HOLSET VGT CHEETAH TURBOCHARGER. This stock-appearing, drop-in Holset VGT Cheetah features Fleece’s exclusive 63mm Forged Milled Wheel (FMW) compressor and a high-flow turbine wheel, delivering quick spool-up, lower EGTs, and big top-end power while retaining full exhaust brake and factory drivability. Fleece FPE-351-1317, 2013-2017 Cummins 6.7 turbo upgrade, 63mm FMW Holset VGT Cheetah, HE300VG drop in turbocharger, Ram 2500 3500 Cheetah turbo, 700 RWHP Cummins turbo, CPP Diesel Fleece Cheetah

Performance Benefits

• Direct drop-in replacement for the factory HE300VG turbo – no expensive install kit required.
• 63mm FMW billet compressor wheel and high-flow turbine wheel for strong power and quick response.
• Maintains all OEM VGT functions including exhaust brake and warm-up features.
• Capable of supporting vehicle mods up to ~700 RWHP while keeping street manners in check.
• Includes a brand new actuator – no extra actuator purchase or programming needed.
• 50-state legal with CARB EO D-834-2 (where applicable).

Fitment

Engine: 6.7L Cummins Turbo Diesel
Platform: 2013-2017 Ram 2500 & 3500 (pickups) equipped with the factory Holset HE300VG VGT turbocharger
Turbo type: Holset VGT Cheetah, 63mm FMW compressor, upgraded turbine wheel
Intended use: Towing, daily driving, street performance, light competition

Cross-Reference / Related Fleece Products (CPP Diesel Only)

• FLEECE FPE-351-0712 2007.5-2012 CUMMINS 63MM FMW HOLSET VGT CHEETAH TURBOCHARGER
• FLEECE FPE-CUMM-VGT-INST-KIT TURBOCHARGER INSTALLATION KIT FOR 2007.5-2018 6.7L CUMMINS VGT TURBOCHARGERS
• FLEECE FPE-CTDT-VGT-KIT TURBO DRAIN LINE KIT FOR 6.7L CUMMINS VGT TURBOCHARGERS
• FLEECE FPE-HAR-CUMM-VGT-PT HOLSET HE300VE/VG TURBOCHARGER ACTUATOR PIGTAIL
• FLEECE FPE-351-SP-SEN HE351VE & HE300VE/VG TURBINE SHAFT SPEED SENSOR

What’s Included

• Fleece Performance Holset VGT Cheetah Turbocharger – FPE-351-1317
• Brand new turbo actuator (pre-installed)
• Necessary gaskets and hardware (per Fleece’s kit contents)

The 63mm FMW Holset VGT Cheetah is commonly rated to support builds in the 650–700 RWHP range with proper fueling, tuning, and supporting mods while still retaining great street and towing manners.

Yes. This Cheetah is a 100% drop-in replacement for the factory HE300VG on 2013-2017 6.7L Cummins trucks. It bolts in place of the OE turbo and reuses factory-style connections. For the cleanest install, we recommend pairing it with the FLEECE FPE-CUMM-VGT-INST-KIT.

Yes. The FPE-351-1317 maintains all OEM VGT functionality, including the exhaust brake and warm-up features, when properly installed and calibrated.

Basic operation does not require special tuning just to function; however, custom tuning is strongly recommended to fully take advantage of the turbo’s increased airflow and to support higher horsepower builds safely.

The FPE-351-1317 Cheetah turbocharger is covered under CARB EO D-834-2, making it 50-state legal when used on approved applications. Always verify current EO coverage for your specific model year and configuration.

Many vendors list a core charge for this turbo. Core policies can vary, so please refer to the CPP Diesel product options and core policy for the most accurate, up-to-date core charge information.

Specifications for FLEECE FPE-351-1317