Product Description
Overview
- Direct-fit 4.0" mandrel-bent driver-side tail pipe for 1994–2007 Ford F-250/F-350 Super Duty 7.3L/6.0L Power Stroke.
- Performance Series aluminized steel for durability and value.
- Smooth bends to reduce backpressure and help lower EGTs.
- Designed to integrate with Diamond Eye and compatible 4" systems.
Fitment
- Ford F-250 / F-350 Super Duty — 1994–2007
- Engines: 7.3L Power Stroke (1994–2003), 6.0L Power Stroke (2003–2007)
- Configuration: Single, Driver Side
- Main Piping Diameter: 4.0 inches
- Material/Series: Aluminized Steel, Performance Series
What’s Included
- (1) Driver-side 4" mandrel-bent tail pipe section (122026)
- Clamps/hangers are generally reused or sold separately (check your system kit)
Installation Notes
- Test-fit before final tightening. Clean mating joints for best seal.
- Use new clamps if existing hardware is worn or corroded.
Cross-Reference / Alternatives (Diamond Eye only)
- First Section, Passenger Side (companion): DIAMOND EYE 122025
- Second Section, Passenger Side: DIAMOND EYE 122027
Specifications
| Specifications for DIAMOND EYE 122026 | |
|---|---|
| Brand | Diamond Eye Performance |
| Part Number | 122026 |
| Series | Performance Series |
| Material | Aluminized Steel |
| Main Pipe Diameter | 4.0" |
| Side / Position | Driver Side, Tail Pipe Section |
| UPC | 841963111910 |
| GTIN | 0841963111910 |
| Shipping Weight | ~14 lb |
| Package Dimensions | Approx. 53" × 9" × 13" |
| Shipping Method | Ground (oversize length may apply) |
| Prop 65 Warning | This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. |
FAQ
Will this fit both 7.3L and 6.0L Power Stroke trucks?Yes—this 4" driver-side tail pipe fits 1994–2003 7.3L and 2003–2007 6.0L F-250/F-350 Super Duty models when used with a compatible 4" system.
Is hardware included?
The pipe section is included. Clamps/hangers may be reused from your existing kit or purchased separately as needed.
Is this aluminized or stainless?
This listing is for the Performance Series aluminized steel version of the driver-side tail pipe.
Do I need any cutting or welding?
It is designed as a bolt-on section for compatible 4" systems. Minor trimming/adjustment can be required depending on cab/bed and existing components.
What other sections pair with this pipe?
For a matching passenger-side setup, see Diamond Eye 122025 First Section and 122027 Second Section.
