Product Description
Cummins 4897224 — Genuine Coolant Temperature (ECT) Sensor for ISB 5.9L
MPN: 4897224 | Also Known As: engine coolant temperature sensor, ECT, temp sender | Cross-Refs (ID only): Bosch 0281002471, Ford BG5X10884AA, Iveco 93159374, Deutz 04213210
Genuine Cummins ECT sensor that reports coolant temperature to the ECM for fan strategy, fueling, and protection logic. Direct-fit for 2003–2004 Ram 5.9L Cummins (ISB common-rail) and widely used on Euro 3 ISB/QSB industrial variants. Sold individually (1 per engine).
Features & Benefits
- OE calibration for accurate temperature feedback to the ECM.
- Direct-fit connector and M14×1.5 thread for hassle-free install.
- Restores correct fan engagement and warm-up/derate strategies.
- Durable thermistor design built to Cummins specs.
Verified Fitment (Automotive)
| Year Range | Engine | Chassis |
|---|---|---|
| 2003–2004 | Ram 5.9L ISB (24V Common-Rail) | Ram 2500/3500 |
Industrial/Off-Highway: Used on Euro 3 ISB/QSB (incl. 3.9/5.9L). Verify by ESN before ordering.
Compatibility Notes:
- This listing targets 2003–2004 Ram 5.9L ISB. Later years may use different sensors—confirm by VIN/ESN.
- Cross-references are provided for identification only; always match by ESN or original part marking.
Specifications
- Type: Engine Coolant Temperature (ECT) Sensor, NTC thermistor
- Thread: M14 × 1.5 (wrench size 19 mm)
- Connector: 2-pin
- OE Part Number: Cummins 4897224
- Cross-References (ID only): Bosch 0281002471; Ford BG5X10884AA; Iveco 93159374; Deutz 04213210
- Quantity Required: 1 per engine
Often Paired With
- Thermostat & coolant service: replace if temps were erratic or overheating occurred.
- Connector inspection: repair/replace pigtail if terminals are corroded or loose.
What’s In The Box
- (1) Genuine Cummins Coolant Temperature Sensor (4897224)
Installation Tips
- Disconnect battery; relieve pressure and cool engine before removal.
- Apply appropriate thread sealant if specified by service manual; torque to spec.
- Clear any ECM fault codes and verify fan operation and temperature readings after install.
FAQ
WILL THIS FIT MY 2003–2004 5.9L CUMMINS RAM?
Yes—this is the OE ECT sensor for most 2003–2004 Ram 2500/3500 5.9L ISB common-rail trucks (confirm by VIN/ESN).
IS THIS THE SAME AS BOSCH 0281002471?
Yes—Bosch 0281002471 is a common cross-reference for Cummins 4897224. We still recommend verifying by ESN or the number on your old sensor.
WHAT SYMPTOMS POINT TO A BAD COOLANT TEMP SENSOR?
Erratic temp gauge, fan engagement issues, rich/lean fueling, hard starts, and overheating with related ECM codes.
DO I NEED ANY GASKETS OR SEALS?
The sensor seals via its threaded interface (M14×1.5). Follow service manual guidance on sealant and torque.
WILL THIS WORK ON INDUSTRIAL ISB/QSB ENGINES?
Common on Euro 3 ISB/QSB 3.9/5.9L applications—always verify by ESN for industrial/off-highway engines.
