BDS SUSPENSION BDS667FS 4 INCH LIFT KIT LONG ARM DODGE RAM 2500 POWER WAGON 2008 4WD GAS BLOCK 4 INCH AXLE FOX 2.0 PERFORMANCE

Built to outperform, BDS Suspension engineered a 4-inch lift kit with long arm conversion for your 2008 Dodge RAM 2500 Power Wagon that maximizes performance on and off road.

Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires. BDS built the long lower control arms to reduce caster change through wheel travel which creates a more controlled feeling in the steering wheel. This long arm long arm system retains the factory triangulation of the arms which adds to the stability of the suspension system.

Up front the lift kit includes gas-specific Pro-Ride coil springs, all four control arms plus mounting bracket, forged drop pitman arm and track bar bracket for steering correction, bump stops, sway bar links, and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

In the rear this kit utilizes heavy duty cast steel blocks, longer u-bolts, and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.

Pro-Ride Coil Springs

A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

• Front Lift Method: Coil Spring
• Rear Lift Method: Block
• Shocks Included: Yes
• Front Lift Height: 4 inch
• Rear Lift Height: 4 inch

1. These vehicles were manufactured with two different diameter rear axles. You will need to measure the diameter of your rear axle before ordering. It should be 3-1/2 inch or 4 inch in diameter.
2. Depending on the factory transmission mount, some 4 inch kits may require the transfer case indexing kit if a driveline vibration persists. See installation instructions for details.

• Tubular long arms reduce caster change and create more controlled feeling on and off road
• Heavy duty control arm brackets maintain proper suspension geometry
• Front high strength progressive rate coil springs for a great ride on any terrain
• Front track bar relocation bracket to re-position axle
• Forged drop pitman arm to correct steering angles
• Front sway bar correction to maintain handling performance
• BDS NX2 gas or FOX performance series Internal Floating Piston gas shocks to improved ride and offroad performance

Rear Lift Option Block Kit

• Blocks are made from cast iron for strength.
• Tapered for correct pinion angle.
• Steel pin and hole are offset to restore axle position.

Axle Diameter 4 Inch

The Dodge Ram truck has 2 different rear axle diameters. Please measure your rear axle and select the appropriate rear kit for your vehicle.

FOX 2.0 Performance Series

• 2-inch Impact extruded aluminum body
• Internal floating piston (Internal Floating Piston) monotube design
• CNC machined 6061-T6 aluminum mounting ends
• Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft
• Race-developed high-flow piston design
• Application-specific valving to maximize performance
• Long-lasting clear anodized finish

Kit Components:

• Includes one BDS012405, 03-up Dodge 3/4ton 4 Inch Rear, UPC Code 658848612352
• Includes one BDS012602, 08 Ram 6 Inch Long Arm Box kit, UPC Code 658848612680
• Includes one BDS012801, Dodge Control Arm Mounts, UPC Code 658848612840
• Includes one BDS012802, Dodge Control Arm Box Kit, UPC Code 658848612857
• Includes one BDS032601, 03-12 Dodge Ram 2500(gas) 6 Inch Coil Kit, UPC Code 658848616411
• Includes one BDS122401, 05-13 Power Wagon Sway Bar Links, UPC Code 658848619467
• Includes two FOX98224751, Fox 2.0 Shock 29.85 x 18.25 x 2- S50/EB1
• Includes two FOX98224761, Fox 2.0 Shock 33.85 x 20.75 x 2- EB1/EB1

Transform your 2008 Dodge RAM 2500 Power Wagon into a formidable off-road machine with the BDS SUSPENSION BDS667FS 4-Inch Lift Kit Long Arm. Engineered for peak performance, this comprehensive lift kit offers a 4-inch elevation that enhances both stance and capability, allowing you to tackle challenging terrains with confidence.

This kit is designed with a long arm conversion, which minimizes caster change throughout the wheel's travel. The result is a smoother and more controlled steering experience, enhancing your overall driving dynamics. Built to accommodate tires up to 37 inches, the kit equips your vehicle with robust features. The front setup boasts specialized Pro-Ride coil springs, tailored for gas applications, paired with professional-grade NX2 or FOX 2.0 nitrogen-charged shocks to ensure exceptional ride quality across all surfaces.

The rear is equally powerful, utilizing heavy-duty cast steel blocks and extended u-bolts to provide enhanced lift and stability. A forged drop pitman arm and a sturdy track bar drop bracket optimize steering geometry, ensuring your vehicle remains aligned and responsive, even when tackling the bumps of off-road trails.

Included in the kit are advanced components to maintain original suspension geometry; from heavy-duty control arm brackets to front sway bar correction, every detail is crafted for improved handling. With a mix of durability and performance, the BDS668FS Kit stands out as a vital upgrade for any serious off-road enthusiast.

Before installation, verify your rear axle diameter, as this lift kit accommodates both 3-1/2 inch and 4-inch versions. Lastly, the meticulous engineering and high-quality materials ensure longevity and reliability, making the BDS SUSPENSION BDS667FS a wise investment for your truck. Experience off-road adventures like never before!