BDS SUSPENSION BDS409H 3.5 INCH LIFT KIT JEEP WRANGLER YJ 87-95 LIGHT DUTY LEAF SPRING NX2 NITRO

Designed to improve stance, performance, and capability. BDS Suspension has designed this 3.5-inch lift kit for your 1987-1995 Jeep Wrangler YJ. This kit includes everything necessary to set your truck up right with clearance for up to 33 inch Tires.

This 3.5-inch lift kit includes front and rear Glide-Ride leaf springs with new u-bolts, front and rear track bar relocation brackets to center the axle, brake line brackets, power steering pitman arm, bump stop extensions, and a transfer case drop kit to ease the drive line angles.

Round out this kit with specially tuned NX2 nitro series gas shocks to offer improved damper performance.

Glide-Ride Leaf Springs

Built to outperform, BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design.

These spring feature tapered leafs, anti-friction pads, bolt style leaf alignment clamps and a full military wrap to protect your spring eyes from the rocks. Upgrading to BDS Glide-Ride leaf springs will provide flexibility throughout the suspension cycle.

• Front Lift Method: Leaf Spring
• Rear Lift Method: Leaf Spring
• Shocks Included: Yes
• Front Lift Height: 3.5 inch
• Rear Lift Height: 3.5 inch

1. May require driveshaft lengthening for 13 inch (u-joint to u-joint) driveshaft.
2. May require larger diameter driveshaft if equipped with a 41-1/2 inch front driveshaft.
3. Extended shackles recommended to clear military wrap.
4. Models with accessories like hardtop, rear Tire carrier, roof rack etc., should use #004351 springs on front and rear.
5. When combining lifted shackles with a 3.5 inch suspension system, a tail shaft eliminator kit and a inchCV inch style rear driveshaft may be required to eliminate driveline vibration.
6. Pitman arms will NOT fit Yj models equiped with manual steering.

• Glideride leaf springs to provide full lift height and increased capacity
• Front and rear track bar relocation brackets to center the axle
• Transfer case drop kit to ease the drive line angles
• Standard NX2 Nitro shocks with vehicle-specific valving for better control
• Easy, 100 percent Bolt-on installation

Rear Lift Option

Select the appropriate rear springs based on the weight of your vehicle and hard top vs. soft top.

• Light Duty Leaf Springs - Use these light-duty springs if you have a soft top and plan to either run with the stock spare or no spare at all.

Kit Components:

• Includes two BDS004351, 87-95 Jeep YJ 3.5in Front Spring, UPC Code 658848611515
• Includes two BDS004359, 87-95 Jeep YJ 3.5in Rear Spring, UPC Code 658848611522
• Includes one BDS014351, 87-95 Jeep YJ 3.5 inch Box Kit, UPC Code 658848614080
• Includes one BDS084404, Jeep YJ/TJ Pitman Arm - PS, UPC Code 658848618354
• Includes one BDS124001, Jeep YJ Frt Anti-sway Bar Lnk Kt w/bush, UPC Code 711745604506
• Includes two BDS85950, Shock- 22.95 x 14.65 x 2 - EB1/EB1, UPC Code 711745610033
• Includes two BDS85955, Shock- 28.15 x 16.45 x 2 - S1/EB1, UPC Code 711745610088

Elevate your off-road adventures with the BDS SUSPENSION BDS409H 3.5 Inch Lift Kit, specifically designed for 1987-1995 Jeep Wrangler YJ models. This comprehensive lift kit not only enhances your vehicle's stance but also significantly improves its performance and capability, allowing you to tackle challenging terrains with confidence. Compatible with tires up to 33 inches, this lift kit transforms your Jeep into a rugged powerhouse.

The kit features front and rear Glide-Ride leaf springs, engineered for superior performance. These multi-leaf progressive springs provide a smooth ride, whether you're carrying a load or navigating rocky paths. The exclusive triple-stage design includes tapered leafs, anti-friction pads, and military wrap protection for durability.

Included in the package are essential components such as new u-bolts, front and rear track bar relocation brackets for optimal axle centering, brake line brackets, a power steering pitman arm, bump stop extensions, and a transfer case drop kit designed to alleviate drive line angles. The specially tuned NX2 nitro series gas shocks enhance damper performance, ensuring stability and control on all terrains.

Installation is seamless with a 100 percent bolt-on design, making this lift kit an accessible upgrade for Jeep enthusiasts looking to maximize their vehicle’s off-road potential. Choose the light-duty rear leaf springs for soft top models and stock or no spare, ensuring that your Jeep maintains its agility.

With the BDS 3.5 Inch Lift Kit, experience a remarkable transformation that combines rugged capability with optimal comfort on every journey. Equip your Jeep Wrangler YJ to handle the trails with confidence and style.