BDS SUSPENSION BDS344H 4 INCH LIFT KIT FORD F250/F350 SUPER DUTY 05-07 4WD DIESEL BLOCK KIT WITH FACTORY OVERLOAD NX2 NITRO

Increase ground clearance on your 2005-2007 Ford F250 and F350 Super Duty diesel truck with this 4-inch lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35 inch Tires.

Up front the lift kit includes diesel-specific Pro-Ride coil springs, heavy-duty radius arm drop brackets, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned NX2 or FOX nitrogen charged shocks.

In the rear this kit utilizes a high-strength lift block, longer u-bolts and a matching set of NX2 Nitro or FOX Performance shocks.

Pro-Ride Coil Springs

A pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

• Front Lift Method: Coil Spring
• Rear Lift Method: Block
• Shocks Included: Yes
• Front Lift Height: 4 inch
• Rear Lift Height: 5 inch

1. These trucks were manufactured with and without top mounted overload springs on the rear leaf springs. A top mounted overload is an extra leaf separate from the pack that set above the main leaf. You will need to identify which you have before ordering.
2. If your vehicle is equipped with a carrier bearing, you will need to order 123402 in the accessories section.
3. 5 inch Block included to replace factory block.

• Easy, 100 percent Bolt-on installation
• Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
• Heavy duty radius arm drop brackets provide correct caster and will maintain your stock driving characteristics.
• Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
• Steel lift blocks with built-in bump stop provide level stance from front to rear
• Standard NX2 Nitro shocks with vehicle-specific valving for better control
• Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road

Rear Lift Option Block Kit with Factory Overload

• Determine if your truck was manufactured with or without top-mounted overload springs on the rear leaf springs. 
• Blocks made of steel for high strength.
• Designed to provide correct pinion angles.

Tire Size: 35 x 12.5 Tire Size 2: 35 x 12.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 20 x 9 Back Spacing: 4.5/4.5

Shock Option NX2 Nitro Series

• Nitrogen-charged
• Twin-tube design
• 10-stage velocity-sensitive valving
• Dual-welded ends for increased strength
• 1-3/8-inch high-flow piston
• Self-lubricating seals
• Silver powder coat finish

Kit Components:

• Includes one BDS013328, 1999-2007 Ford F250/F350 Rear Box Kit w/ Overload, UPC Code 658848613298
• Includes one BDS013411, 05 Ford F250/350 4 Inch Front Box Kit, UPC Code 658848613427
• Includes one BDS033411, 2005-2024 Ford F250/F350 Superduty 4 inch Coil Kit - Diesel, UPC Code 658848616527
• Includes one BDS85415, Steering Stab 23.9 x 14.3 - EB1/EB1, UPC Code 711745609112
• Includes two BDS85700, Shock- 25.20 x 15.20 x 2-3/8 - S50/EB2, UPC Code 711745609495
• Includes two BDS85760, Shock- 33.00 x 19.25 x 2-3/8 - EB1/EB1, UPC Code 711745609693

Elevate your off-road experience with the BDS Suspension BDS344H 4-Inch Lift Kit, specifically engineered for 2005-2007 Ford F250 and F350 Super Duty diesel trucks. This comprehensive lift kit not only enhances ground clearance but also transforms your vehicle's stance and performance. With the capacity to accommodate up to 35-inch tires, this kit ensures that your truck is ready for any adventure.

The front setup features diesel-specific Pro-Ride coil springs, designed to provide optimal lift while guaranteeing a smooth, compliant ride. Heavy-duty radius arm drop brackets, a forged drop pitman arm, and a track bar bracket contribute to the effective steering correction, ensuring proper alignment without sacrificing handling. The kit also includes sway bar relocation and brake line brackets for added convenience.

For the rear, a sturdy lift block pairs seamlessly with longer u-bolts and a matching set of NX2 Nitro shocks, delivering unparalleled performance and ride quality across all terrain types. The robust steel lift blocks include built-in bump stops, promoting a level stance and maintaining correct pinion angles.

Featuring easy, 100% bolt-on installation, this lift kit is designed for hassle-free fitting with no cutting or welding required. The Pro-Ride dual-rate coil springs enhance ride comfort, while the heavy-duty components maintain stock driving characteristics. Choose between standard NX2 Nitro shocks or upgrade to the FOX 2.0 Performance Series for maximum on and off-road capability.

Before purchasing, it’s important to check whether your truck has top-mounted overload springs. This all-encompassing lift kit is not just an upgrade; it’s an investment in enhanced performance, style, and capability for your Ford Super Duty truck. Built to last, the BDS344H 4-Inch Lift Kit is your ultimate solution for conquering any landscape.