BDS SUSPENSION BDS2103FS 5.5 INCH LIFT KIT W/ RADIUS ARM RAM 2500 W/ REAR AIR RIDE 14-18 4WD GAS FOX 2.0 PERFORMANCE SHOCKS

Built to outperform, BDS Suspension engineered a 5.5-inch lift kit with radius arm for your 2014-2018 RAM 2500 gas powered truck that will surely impress. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires.

Up front the lift kit includes gas-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

At this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied.

In the rear this kit utilizes heavy duty air bag spacers, track bar relocation bracket to correct axle positioning, bump stop extensions, sway bar links and a matching set of NX2 Nitro or FOX 2.0 Performance shocks. BDS also supplies new air ride leveling sensor brackets to re-position the ride height sensors allowing it to perform just like it does at factory ride height and maintain full air bag range of motion.

HD Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.

Pro-Ride Coil Springs

A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Fox 2.0 Performance Shocks

• Front Lift Method: Coil Spring
• Rear Lift Method: Coil Spring
• Shocks Included: Yes
• Front Lift Height: 5.5 inch
• Rear Lift Height: 4 inch

1. For OE Air Ride systems only
2. 6.4L gas models will require exhaust modification to clear the front driveshaft. 5.7L gas models may require exhaust modification as well. The vehicle can be driven without the front driveshaft to an exhaust shop for modifications to be made before reinstalling the driveshaft.

• Heavy duty tubular radius arms improve strength, handling and caster control
• High strength progressive rate coil springs for a great ride on any terrain
• Track bar relocation brackets to re-position axle
• Forged drop pitman arm to correct steering angles
• Front sway bar correction to maintain handling performance
• HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
• BDS NX2 gas or FOX performance series Internal Floating Piston gas shocks to improved ride and offroad performance

Tire Size: 37 x 12.5 Tire Size 2: 35 x 12.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 17 x 9 Back Spacing: 4.5/4.5

Kit Components:

• Includes one BDS012529, 14-18 Ram 2500 5 inch Rear Air Ride Box Kit, UPC Code 658848612666
• Includes one BDS012615, 2013-2018 Ram 2500/3500 4wd 6 inch Radius Arm Front Box Kit, UPC Code 711745611719
• Includes one BDS032401, 2013-2018 Ram 3500 / 2014-2018 2500 Ram - Front Coils 4 inch Diesel - 5.5 inch Gas, UPC Code 658848616367
• Includes one BDS122321, 2013-2024 Ram 2500 /2013-2024 Ram 3500 Radius Arm Box Kit, UPC Code 658848619429
• Includes one BDS122616, Ram T-Case Index - Gas - 6 Bolt, UPC Code 658848619702
• Includes two FOX98224752, Fox 2.0 Shock 28.25 x 17.15 x 2- S50/EB1
• Includes two FOX98224753, Fox 2.0 Shock - 26.85 x 16.75 x 2- Special/EB1

The BDS Suspension BDS2103FS 5.5 Inch Lift Kit is the ultimate upgrade for your 2014-2018 RAM 2500 gas truck, designed for those who demand exceptional performance on both the road and off the beaten path. This lift kit not only elevates your vehicle by 5.5 inches, but it also enhances its stance, capability, and ride quality while accommodating massive 37-inch tires for a commanding presence on any terrain.

Included in this comprehensive kit are gas-specific Pro-Ride coil springs and heavy-duty replacement radius arms that provide unmatched strength and control. The forged drop pitman arm and track bar bracket ensure precise steering correction, while bump stops and brake line brackets support safe suspension travel. For those seeking superior shock absorption, the kit features precision-tuned NX2 or FOX 2.0 nitrogen-charged shocks, offering an optimal balance of comfort and performance.

The rear of the lift kit utilizes robust air bag spacers and a track bar relocation bracket, which effectively maintains axle positioning and performance. To ensure seamless integration with the factory air ride system, new air ride leveling sensor brackets are included, allowing for unmatched ride height precision.

As an integral part of the design, the heavy-duty tubular radius arms replace the factory stamped steel components, providing enhanced caster control and durability. The high-strength, progressive rate coil springs are engineered for a smooth, consistent ride across various terrains, ensuring maximum reliability without premature coil bind.

This lift kit is meticulously crafted to provide enhanced handling, steering geometry, and overall performance, making it an essential upgrade for anyone serious about offroading or looking to make a bold statement on the road. Transform your RAM 2500 with this lift kit and experience the difference in performance and style.