BDS SUSPENSION BDS1781FS 5.5 INCH LIFT KIT RAM 3500 13-18 4WD GAS 4 INCH BLOCK FOX 2.0 PERFORMANCE SHOCKS

Improve the ride and style of your 2013-2018 RAM 3500 gas powered truck with this 5.5-inch lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37 inch Tires.

Up front the lift kit includes gas-specific Pro-Ride coil springs, radius arms drop brackets, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.

Pro-Ride Coil Springs

A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

• Front Lift Method: Coil Spring
• Rear Lift Method: Block
• Shocks Included: Yes
• Front Lift Height: 5.5 inch
• Rear Lift Height: 4 inch

1. 6.4L gas models will require exhaust modification to clear the front driveshaft. 5.7L gas models may require exhaust modification as well. The vehicle can be driven without the front driveshaft to an exhaust shop for modifications to be made before reinstalling the driveshaft.
2. The carrier bearing drop is necessary for models equipped with two-piece rear drive shaft.
3. Some vehicles may require a rear driveshaft spacer kit 122007 to maintain adequate rear driveshaft engagement
4. DRW models fit inner wheel clearance to the upper u-bolt plate on 5.5-6 inch kits

• Heavy duty radius arm drop brackets maintain proper suspension geometry
• Front high strength progressive rate coil springs for a great ride on any terrain
• Front track bar relocation bracket to re-position axle
• Forged drop pitman arm to correct steering angles
• Front sway bar correction to maintain handling performance
• HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
• BDS NX2 gas or FOX performance series Internal Floating Piston gas shocks to improved ride and offroad performance

Rear Lift Option Block Kit

• 4 Inch Block: Tail low to level stance
• Made of cast iron for high strength.
• Designed to provide correct pinion angles.

Shock Option Fox 2.0 Performance Shocks

Tire Size: 35 x 12.5 Tire Size 2: 37 x 13.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 17 x 9 Back Spacing: 4.5/5.625

Kit Components:

• Includes one BDS012405, 03-up Dodge 3/4ton 4 Inch Rear, UPC Code 658848612352
• Includes one BDS012610, 2013 Ram 3500 6 inch Front Box Kit, UPC Code 658848612727
• Includes one BDS032401, 2013-2018 Ram 3500 / 2014-2018 2500 Ram - Front Coils 4 inch Diesel - 5.5 inch Gas, UPC Code 658848616367
• Includes one BDS122616, Ram T-Case Index - Gas - 6 Bolt, UPC Code 658848619702
• Includes two FOX98224752, Fox 2.0 Shock 28.25 x 17.15 x 2- S50/EB1
• Includes two FOX98224761, Fox 2.0 Shock 33.85 x 20.75 x 2- EB1/EB1

Transform your 2013-2018 RAM 3500 into an off-road powerhouse with the BDS Suspension BDS1781FS 5.5-inch Lift Kit. Engineered for both performance and style, this lift kit enhances your truck’s stance, capability, and overall driving experience while allowing clearance for tires up to 37 inches.

Featuring robust Pro-Ride coil springs specifically designed for gas-powered models, the lift kit provides a remarkable 5.5 inches of lift at the front and 4 inches in the rear, ensuring a smooth ride across varied terrains. The inclusion of high-strength fabricated lift blocks, longer u-bolts, and top-tier NX2 or FOX 2.0 Performance shocks in the rear optimizes stability and comfort, making each journey a thrill.

The kit doesn’t compromise on steering dynamics either. A forged drop pitman arm and heavy-duty track bar drop bracket correct steering angles, maintaining proper suspension geometry. Additional components like bump stops and brake line brackets are included for a comprehensive installation experience.

This lift kit is designed for compatibility with 18-inch and 17-inch wheel diameters, allowing you to take full advantage of larger tire options of 35x12.5 and 37x13.5. With the ability to enhance both its aesthetic appeal and off-road capability, the BDS1781FS Lift Kit is the perfect addition for truck enthusiasts who demand the best.

Installation may require minor modifications for certain engine models, but the drop-in components ensure that factory driveshafts can still be utilized. Trust in BDS Suspension's legacy of quality and performance—step up your RAM 3500's game with the BDS1781FS Lift Kit and conquer the roads ahead.