BDS SUSPENSION BDS1777H 4 INCH LIFT KIT W/ 4-LINK RAM 3500 13-18 4WD GAS 2 INCH BLOCK NX2 NITRO SHOCKS

Built to outperform, BDS Suspension engineered a 4-inch lift kit with 4-Link conversion for your 2013-2018 RAM 3500 gas powered truck that will surely impress. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35 inch Tires.

Up front the lift kit includes gas-specific Pro-Ride coil springs, 4-Link control arms with conversion mounts, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.

4-Link Conversion

Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength 1/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.

Pro-Ride Coil Springs

A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

• Front Lift Method: Coil Spring
• Rear Lift Method: Block
• Shocks Included: Yes
• Front Lift Height: 4 inch
• Rear Lift Height: 2 inch

1. The carrier-bearing drop kit is necessary for models equipped with two-piece rear drive shaft.
2. 6.4L gas models will require exhaust modification to clear the front driveshaft. 5.7L gas models may require exhaust modification as well. The vehicle can be driven without the front driveshaft to an exhaust shop for modifications to be made before reinstalling the driveshaft.

• Heavy duty 4-link improve strength, handling and caster control
• Front high strength progressive rate coil springs for a great ride on any terrain
• Front track bar relocation bracket to re-position axle
• Forged drop pitman arm to correct steering angles
• Front sway bar correction to maintain handling performance
• BDS NX2 gas or FOX performance series Internal Floating Piston gas shocks to improved ride and offroad performance

2 Inch Block Kit

• Tail low to level stance

Tire Size: 35 x 12.5 Tire Size 2: 37 x 13.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 17 x 9 Back Spacing: 4.5/5.625

Shock Option NX2 Nitro Series

• Nitrogen-charged
• Twin-tube design
• 10-stage velocity-sensitive valving
• Dual-welded ends for increased strength
• 1-3/8-inch high-flow piston
• Self-lubricating seals
• Silver powder coat finish

Kit Components:

• Includes one BDS012207, 03-13 Dodge 2500 2 Inch Rear Box w/4, UPC Code 658848612093
• Includes one BDS012403, 2013-2018 Ram 3500 4-Link Box Kit (2of2), UPC Code 658848612345
• Includes one BDS012414, 2013-2018 Dodge Ram 2500/3500 4 inch 4-Link Box Kit (1of2), UPC Code 658848612390
• Includes one BDS032302, 2013-2024 Ram 3500 / 2014-2024 2500 Ram Coils 3 inch Diesel - 4 inch Gas, UPC Code 658848616343
• Includes two BDS85700, Shock- 25.20 x 15.20 x 2-3/8 - S50/EB2, UPC Code 711745609495
• Includes two BDS85759, Shock- 29.80 x 17.60 x 2-3/8 - EB1/EB1, UPC Code 711745609686

The BDS Suspension BDS1777H 4-Inch Lift Kit with 4-Link conversion is meticulously engineered to elevate the performance and versatility of your 2013-2018 RAM 3500 gas-powered truck. This complete kit is designed for enthusiasts who demand not only a commanding presence but also improved handling and stability on diverse terrains. With the ability to accommodate tires up to 35 inches, this lift kit transforms your truck into a rugged powerhouse.

At the forefront of the BDS1777H is a set of gas-specific Pro-Ride coil springs that deliver a progressive ride, ensuring your vehicle handles smoothly while tackling bumps and obstacles. The addition of 4-Link control arms with robust 1/4-inch steel brackets optimizes suspension geometry, enhancing both strength and driving dynamics. Steering correction is seamlessly integrated with a forged drop pitman arm and a heavy-duty track bar bracket to maintain perfect axle positioning during suspension travel.

The rear of the kit boasts high-strength fabricated lift blocks and extended u-bolts, paired with NX2 Nitro or FOX 2.0 performance shocks to ensure a balanced ride at any speed. The two-inch rear lift provides a level stance for enhanced aesthetics and off-road capability.

Designed with advanced performance features, the BDS1777H includes precision-tuned shocks that offer superior response and control, making every drive exhilarating. Additionally, the included sway bar correction and carrier-bearing drop kits (if required) further ensure optimal handling and comfort.

With outstanding craftsmanship and comprehensive components, the BDS SUSPENSION BDS1777H lift kit is a definitive upgrade for any RAM 3500 owner seeking to enhance their truck’s capabilities, style, and overall driving experience. Elevate your truck’s game and conquer new terrains with unrivaled confidence.