BDS SUSPENSION BDS1634FS 4 INCH LIFT KIT W/ 4-LINK RAM 2500 W/ REAR AIR RIDE 14-18 4WD GAS FOX 2.0 PERFORMANCE SHOCKS

Built to outperform, BDS Suspension engineered a 4-inch lift kit with 4-Link conversion for your 2014-2018 RAM 2500 gas powered truck that will surely impress. Works on trucks with factory rear air ride option. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35 inch Tires.

Up front the lift kit includes gas-specific Pro-Ride coil springs, 4-Link control arms with conversion mounts, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

In the rear this kit utilizes heavy duty air bag spacers, track bar relocation bracket to correct axle positioning, bump stop extensions, sway bar links and a matching set of NX2 Nitro or FOX 2.0 Performance shocks. BDS also supplies new air ride leveling sensor brackets to re-position the ride height sensors allowing it to perform just like it does at factory ride height and maintain full air bag range of motion.

4-Link Conversion

Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength 1/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.

Pro-Ride Coil Springs

A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

• Front Lift Method: Coil Spring
• Rear Lift Method: Spacer
• Shocks Included: Yes
• Front Lift Height: 4 inch
• Rear Lift Height: 3.5 inch

1. For OE Air Ride systems only
2. 6.4L gas models will require exhaust modification to clear the front driveshaft. 5.7L gas models may require exhaust modification as well. The vehicle can be driven without the front driveshaft to an exhaust shop for modifications to be made before reinstalling the driveshaft.

• Heavy duty 4-link arms improve strength, handling and caster control
• High strength progressive rate coil springs for a great ride on any terrain
• Track bar relocation brackets to re-position axle
• Forged drop pitman arm to correct steering angles
• Front sway bar correction to maintain handling performance
• HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
• BDS NX2 gas or FOX performance series Internal Floating Piston gas shocks to improved ride and offroad performance

FOX 2.0 Performance Series

• 2-inch Impact extruded aluminum body
• Internal floating piston (Internal Floating Piston) monotube design
• CNC machined 6061-T6 aluminum mounting ends
• Massive 5/8-inch hard chrome plated heat-treated alloy steel shaft
• Race-developed high-flow piston design
• Application-specific valving to maximize performance
• Long-lasting clear anodized finish

Tire Size: 37 x 12.5 Tire Size 2: 37 x 12.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 20 x 9 Back Spacing: 5.625/5.625

Kit Components:

• Includes one BDS012359, 14-18 Ram 2500 3.5 inch Rear AirRide Box Kit, UPC Code 658848612314
• Includes one BDS012403, 2013-2018 Ram 3500 4-Link Box Kit (2of2), UPC Code 658848612345
• Includes one BDS012414, 2013-2018 Dodge Ram 2500/3500 4 inch 4-Link Box Kit (1of2), UPC Code 658848612390
• Includes one BDS032302, 2013-2024 Ram 3500 / 2014-2024 2500 Ram Coils 3 inch Diesel - 4 inch Gas, UPC Code 658848616343
• Includes two FOX98224700, Fox 2.0 Shock 25.65 x 16.05 x 2- S50/EB1
• Includes two FOX98224706, Fox 2.0 Shock - 23.65 x 15.05 x 2- Special/EB1

The BDS Suspension BDS1634FS 4-Inch Lift Kit with 4-Link is a premium upgrade designed specifically for the 2014-2018 RAM 2500 gas-powered 4WD trucks equipped with factory rear air ride. This exceptional lift kit enhances your truck's stance, performance, and off-road capability, accommodating tires up to 35 inches in size.

This comprehensive lift kit features gas-specific Pro-Ride coil springs paired with a sophisticated 4-Link control arm system that optimally redirects suspension geometry for improved handling and stability. The inclusion of heavy-duty components, such as a forged drop pitman arm and track bar bracket, ensures proper steering correction, allowing for smooth and responsive maneuverability.

The rear suspension benefits from robust air bag spacers and a track bar relocation bracket that precisely positions the axle, along with bump stop extensions and sway bar links. BDS supplies enhanced air ride leveling sensor brackets, which seamlessly maintain factory-like ride height and full air bag functionality.

The supplied Pro-Ride coil springs are constructed from high-tensile steel, offering a reliable, progressive ride quality that adapts to various terrains. With front lift dimensions of 4 inches and a rear lift of 3.5 inches, this kit transforms your RAM truck into an off-road powerhouse without compromising on daily driveability.

Furthermore, the kit includes the renowned FOX 2.0 Performance Series shocks, featuring high-flow piston designs and a durable aluminum body that enhances both on-road comfort and off-road performance. The BDS1634FS is not merely a lift kit; it’s a full-fledged upgrade engineered for those looking to elevate their driving experience while maintaining optimal vehicle control and safety in every situation.