BDS SUSPENSION BDS1613H 4 INCH LIFT KIT W/ 4-LINK RAM 3500 13-18 4WD GAS 3 INCH BLOCK NX2 NITRO SHOCKS

Built to outperform, BDS Suspension engineered a 4-inch lift kit with 4-Link conversion for your 2013-2018 RAM 3500 gas powered truck that will surely impress. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35 inch Tires.

Up front the lift kit includes gas-specific Pro-Ride coil springs, 4-Link control arms with conversion mounts, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.

4-Link Conversion

Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength 1/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.

Pro-Ride Coil Springs

A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.

Steering Correction

To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

• Front Lift Method: Coil Spring
• Rear Lift Method: Block
• Shocks Included: Yes
• Front Lift Height: 4 inch
• Rear Lift Height: 2 inch

1. The carrier-bearing drop kit is necessary for models equipped with two-piece rear drive shaft.
2. 6.4L gas models will require exhaust modification to clear the front driveshaft. 5.7L gas models may require exhaust modification as well. The vehicle can be driven without the front driveshaft to an exhaust shop for modifications to be made before reinstalling the driveshaft.

• Heavy duty 4-link improve strength, handling and caster control
• Front high strength progressive rate coil springs for a great ride on any terrain
• Front track bar relocation bracket to re-position axle
• Forged drop pitman arm to correct steering angles
• Front sway bar correction to maintain handling performance
• BDS NX2 gas or FOX performance series Internal Floating Piston gas shocks to improved ride and offroad performance

Rear Lift Option 3 Inch Block Kit

• Level to tail high appearance

Tire Size: 35 x 12.5 Tire Size 2: 37 x 13.5 Wheel Diameter: 18 x 9 Wheel Diameter 2: 17 x 9 Back Spacing: 4.5/5.625

Shock Option NX2 Nitro Series

• Nitrogen-charged
• Twin-tube design
• 10-stage velocity-sensitive valving
• Dual-welded ends for increased strength
• 1-3/8-inch high-flow piston
• Self-lubricating seals
• Silver powder coat finish

Kit Components:

• Includes one BDS012317, 2013 Ram 3500 3 inch Rear Box w/4 inch axle, UPC Code 711745611450
• Includes one BDS012403, 2013-2018 Ram 3500 4-Link Box Kit (2of2), UPC Code 658848612345
• Includes one BDS012414, 2013-2018 Dodge Ram 2500/3500 4 inch 4-Link Box Kit (1of2), UPC Code 658848612390
• Includes one BDS032302, 2013-2024 Ram 3500 / 2014-2024 2500 Ram Coils 3 inch Diesel - 4 inch Gas, UPC Code 658848616343
• Includes two BDS85700, Shock- 25.20 x 15.20 x 2-3/8 - S50/EB2, UPC Code 711745609495
• Includes two BDS85759, Shock- 29.80 x 17.60 x 2-3/8 - EB1/EB1, UPC Code 711745609686

Experience unparalleled performance with the BDS Suspension BDS1613H 4 Inch Lift Kit, specifically designed for the 2013-2018 RAM 3500 gas-powered 4WD truck. This impressive lift kit not only enhances your vehicle's stance but also significantly improves its handling and off-road capabilities, making it a perfect choice for enthusiasts seeking adventure.

The BDS1613H lift kit raises your truck by 4 inches in the front and 2 inches in the rear, allowing for the clearance you need for tires up to 35 inches. Engineered with precision, this kit integrates gas-specific Pro-Ride coil springs and robust 4-Link control arms that boost both ride quality and stability. The inclusion of a forged drop pitman arm and track bar bracket ensures optimal steering correction, maintaining proper axle positioning throughout suspension travel.

Key aspects of this kit include high-strength fabricated lift blocks and longer u-bolts in the rear, paired with NX2 Nitro or FOX 2.0 Performance shocks that are nitrogen-charged for enhanced ride control. The progressive rate of the coil springs guarantees a smooth and predictable performance in diverse terrains, from city streets to rugged trails.

Designed for ease of installation, the BDS 4-Link conversion optimizes suspension geometry, translating to improved handling and robust caster control. Additional components like front sway bar relocation brackets and brake line brackets further complement the kit, making it an all-encompassing suspension solution.

With its combination of strength, stability, and improved ride quality, the BDS Suspension BDS1613H Lift Kit is your ultimate upgrade for conquering any environment while enhancing the overall aesthetics of your RAM 3500. Experience the thrill of more capable off-roading with a lift kit engineered to perform and last.