BDS SUSPENSION BDS1524H 4" RADIUS ARM LIFT KIT WITH NX2 SHOCKS 2017-2019 FORD F-250/350 6.7L POWERSTROKE 4WD

Lift your 2017-2019 Ford F-250 6.7L Powerstroke 4WD with a BDS Suspension BDS1524H 4" Radius Arm Lift Kit With NX2 Shocks. At the heart of this system is a pair of heavy-duty radius arms built to withstand whatever abuse you can throw at them. Built from 1-3/4" OD -10GA DOM tubing with support gussets, these replacement arms are far superior to the factory stamped steel units. They use a high clearance design for extra ground clearance and are formed inward to allow for additional clearance of oversized tires. They incorporate factory style 3-1/4" rubber bushings to minimize road vibrations and allow for a long, maintenance-free bushing life. The arms bolt into the factory mounting points and reposition the front axle to correct caster angle.

The additional 4" lift comes from a pair of full length ProRide coil springs. These springs are available for diesel or gas engine specific spring rates for optimal performance and a true 4" of lift. These paired with BDS NX2 series gas shocks offer a smooth ride and improved control over rough terrain. To improve steering angles a forged drop pitman arm is supplied with an integrated drag link flip. Used in combination with the 1/4" thick heavy duty track bar drop bracket will position the front axle and keep the track bar angle in phase with the steering for improved handling. Also included for the front suspension are a pair of sway bar relocation brackets, bump stop extensions, brake line relocation brackets and a NX2 series steering stabilizer with mounting bracket.

In the rear, BDS offers a choice of a lift block with integrated bump stop wing that is used in place of the factory block on the F250 or F250 to level the stance. Longer black e-coated U-bolts and matching BDS NX2 round out this 4" radius arm lift kit.

FEATURES:

• 4" Lift Kit

• Rear Lift Blocks

• Bump Stop Extensions

• Black E-Coated U-Bolts

• Sway Bar Drop Brackets

• Forged Drop Pitman Arm

• High-Strength 4-Link Setup

• BDS NX2 Nitro Series Shocks

• Brake Line Relocation Brackets

• Heavy-Duty Track Bar Relocation Kit

• Covered By BDS's "No Fine Print" Warranty

• All Necessary Mounting Hardware Included

• Full-Length ProRide Diesel Specific Coil Spring

SUGGESTED WHEEL & TIRE COMBINATIONS

37 x 12.50 w/17 x 9 and 4.5" - 5" back spacing

37 x 12.50 w/18 x 9 and 4.5" - 5" back spacing

37 x 12.50 w/20 x 9 and 4.5" - 5" back spacing

*trimming may be required

IN THE BOX

BDS1524H

NX2 Series - 3-Leaf Main - 5" Block

KIT NOTES:

If equipped with a 2-piece rear driveshaft, BDS Carrier Bearing Drop Kit may be required (part # 123402).

37 x 12.50" tires may require minor trimming.

Some models may be factory equipped with a 2-leaf main rear leaf spring pack and others a 3-leaf main. Be sure to order the correct option when customizing your kit.

KIT CONTENTS:

(1) BDS013414 - 2017-2022 Super Duty 4" Front Box Kit

(1) BDS013516 - 2017 F250 5" Rear Block Kit -3 Leaf Main

(1) BDS033411 - 2005-2022 Ford F250/F350 Diesel 4in Coil Kit

(1) BDS123251 - 2005-2022 Ford F250/F350 Radius Arm Kit, Pair

(1) BDS85431 - 2017-2022 F250/F350 Single Stabilizer - BDS Only

(2) BDS85700 - Shock- 25.20 x 15.20 x 2-3/8 - S50/EB2

(2) BDS85718 - Shock - 33.00 x 19.25 x 2-3/8 - EB1/EB1

VEHICLE FITMENT