Banks massive 3.5-inch boost tubes are the largest charge air cooler pipes on the market, flowing 680 CFM and 87 percent more air than stock! Smooth mandrel-bent tubes deliver more air to your engine while reducing boost pressure loss resulting in quicker turbo spool and more power.

Banks Boost Tubes are the largest charge air cooler pipes in the industry measuring in at a full 3.5 inch. Every other competitive product on the market tops out at 3.0 inch, and your factory pipes are only 2.5 inch with crushed bent corners and flimsy plastic components. By contrast, Banks Boost Tubes are made of high-quality aluminized steel for maximum strength and durability. With Banks Boost Tubes' smooth bends, your turbo can spool quicker thanks to improved boost pressure retention for maximum horsepower.

Key Features

• Huge increase in size and flow over stock and competitors (3.5" vs 2.5")
• Billet venturi couplers maintain boost pressure
• Mandrel-bent aluminized steel construction
• Constant diameter tubing for the best flow
• Allow the turbocharger to spool up faster.
• Spring-loaded constant tension clamps
• Improves airflow by 87% over stock.
• Flows 680 CFM vs 364 CFM stock.
• 5-ply heavy-duty silicone couplers
• Greater cooling capacity

BANKS BOOST TUBES FLOW BEST

Banks oversized charge air cooler pipes and a unique billet intercooler adapter result in less boost pressure loss from turbo to intake manifold.

With an 87% improvement in airflow, your turbo can spool faster and sustain boost pressure with less wasted energy and heat.

Banks Boost-Tubes allow your engine, and specifically your turbo, to work less hard in compressing intake air; this maximizes horsepower delivery while reducing engine stress.

---

INDUCTION PERFECTION

At Banks Power, our goal has always been to out-perform stock, our competitors, and even ourselves.

Fitting a full 3.5" charge air cooler pipe through the existing engine bay compartment of your L5P was no easy task, but we did it.

Put side by side with the factory piping, ours could practically eat the stock one whole, all while smoothing out tight bends and improving outflow.

---

GOING THE EXTRA MILE

One of the keys to our high performance comes in our unique cold side billet intercooler coupler.

Our engineers used CFD simulations to design the perfect taper to maximize airflow and reduce restriction and drag at the connection point.

The shape and curvature of this coupler is critical to maintaining the pressure efficiency throughout the intercooler system.

---

DO IT RIGHT

Whether you are looking at the cheap OEM plastic intercooler return pipe that's prone to cracking and failure, or the undersized alternatives from the other guys, there really is no comparison.

For peak performance, durability, and reliability, you either go Banks, or you don't go at all. Upgrade to full 3.5-inch charge air cooler pipes for your L5P, with Banks Boost Tubes.