BANKS 25997 BOOST TUBE UPGRADE KIT (RED) FOR 10-12 CUMMINS 6.7L 24V

Increase flow area up to 37 percent over the stock boost tubes with Banks' huge 3-1/2 inch boost tubes. Stock Ram tubes are plastic. Banks boost tubes are 3-1/2 inch constant diameter mandrel bent Aluminized Steel with larger radius bends. More air allows for more fuel which means more horsepower.

Are you running the new bad-ass Banks Monster-Ram for the 6.7L Cummins? Banks boost tubes are larger than the factory pipe and designed to work with the stock elbow or new Banks Monster-Ram (3.5 inch or 4 inch) which will improve airflow, and allow the turbocharger to spool up faster.

Banks cold side tubes have 37 percent greater flow area than stock tubes. Produced from high-quality aluminized steel, the tubes are mandrel bent and constant diameter. This allows for quicker turbo spool. Better flowing intercooler tubes improve retention of boost pressure (increases density) between turbo, intercooler, and intake resulting in maximum horsepower. Our red powder-coat finish stops before the end of the tubes for better grip ensuring our 4- and 5-ply heavy-duty high-temperature silicone couplers hold tight under high-boost conditions. Spring-loaded constant tension clamps maintain a stronger grip to prevent leaks or blown boots.

This kit is designed to work with the stock elbow or new Banks Monster-Ram (3.5 inch or 4 inch) and the stock intercooler (or aftermarket intercooler with stock inlet and outlet size and location).

Key Features

• Increase flow area up to 37 percent over the stock boost tubes with Banks' huge 3-1/2 inch boost tubes.
• Stock Ram tubes are plastic.
• Banks boost tubes are 3-1/2 inch constant diameter mandrel bent Aluminized Steel with larger radius bends.
• More air allows for more fuel which means more horsepower.
• Huge increase in size and flow over stock (3.5 inch vs 3.0 inch)
• Greater cooling capacity
• Lower EGTs
• Mandrel-bent aluminized steel construction
• Constant diameter tubing for the best flow
• Perfect fit and finish
• 4- and 5-ply heavy-duty silicone couplers
• Spring-loaded constant tension clamps
• Combine with Banks 3.5 inch or 4 inch Monster Ram for maximum power
• Works with stock intercooler or aftermarket intercooler with stock inlet and outlet size and location

CARB E.O. D-161-122

The BANKS 25997 BOOST TUBE UPGRADE KIT (RED) for 2010-2012 Cummins 6.7L 24V engines is a performance-enhancing masterpiece designed to take your vehicle to the next level. Engineered to increase flow area by up to 37% over stock boost tubes, these 3-1/2-inch boost tubes from Banks are a game-changer. Say goodbye to the limitations of plastic factory Ram tubes and welcome the unparalleled quality of Banks' constant diameter mandrel bent Aluminized Steel boost tubes with larger radius bends.

Experience the power of more air translating into more fuel and ultimately more horsepower. If you're already rocking the Banks Monster-Ram for the 6.7L Cummins, these boost tubes are a perfect complement. Larger than factory pipes, the Banks boost tubes are specifically crafted to work seamlessly with either the stock elbow or the Banks Monster-Ram, promoting improved airflow and faster turbocharger spool up.

Crafted from high-quality aluminized steel, these boost tubes boast mandrel bent construction and a constant diameter, ensuring a swift turbo spool. The enhanced flow area of Banks' cold side tubes maximizes boost pressure retention between turbo, intercooler, and intake, delivering a surge in horsepower. The red powder-coat finish not only adds a touch of style but also enhances grip for the heavy-duty high-temperature silicone couplers to hold tight even under high-boost conditions.

With spring-loaded constant tension clamps guaranteeing a secure fit and preventing leaks or blown boots, this kit is designed to work seamlessly with stock or aftermarket intercoolers that match the stock inlet and outlet size and location. Upgrade your engine's performance with these key features:

- Larger diameter boost tubes for increased flow
- Mandrel-bent aluminized steel construction
- Red powder-coated finish for style and grip
- Improved airflow for higher horsepower
- Compatible with stock or aftermarket setups
- Perfect fit and finish for optimal performance

Unleash the full potential of your Cummins 6.7L engine with the BANKS 25997 BOOST TUBE UPGRADE KIT, a must-have for any performance-driven vehicle enthusiast.