BANKS 25992 BOOST TUBE UPGRADE KIT FOR 13-18 CUMMINS 6.7L 24V

Increase flow area up to 103 percent over the stock 2-3/4 inch boost tubes with Banks' huge 3-1/2 inch OEM left and right side boost tubes. Stock hot side tube is dented at the factory, bringing it's diameter down to a tiny 2-1/4 inch. Banks boost tubes are 3-1/2 inch constant diameter mandrel bent with larger radius bends. More air allows for more fuel which means more horsepower.

Banks hot and cold side tubes have up to 103 percent greater flow area than stock tubes. Produced from high-quality aluminized steel, the tubes are mandrel bent and constant diameter. This allows for quicker turbo spool. Better flowing intercooler tubes improve retention of boost pressure (increases density) between turbo, intercooler, and intake resulting in maximum horsepower. Our red powder-coat finish stops before the end of the tubes for better grip ensuring our 4- and 5-ply heavy-duty high-temperature silicone couplers hold tight under high-boost conditions. Spring-loaded constant tension clamps maintain a stronger grip to prevent leaks or blown boots.

Looking for the ultimate flow increase? Banks Boost-Tubes are larger than the factory pipe and designed to work with not only the stock elbow but also the new Banks Monster-Ram Gen 2 which will improve airflow, and allow the turbocharger to spool up even faster.

Key Features

• 3-1/2 inch constant diameter mandrel bent with larger radius bends
• Combine with Banks Monster Ram Gen 2 for maximum power
• More air allows for more fuel which means more horsepower
• Over 73 percent larger flow area vs stock (3.5 in vs 2.75 in)
  (103 percent larger if you count the OEM dent)
• 4- and 5-ply heavy-duty silicone couplers
• Spring-loaded constant tension clamps
• Greater cooling capacity
• Perfect fit and finish
• Lower EGTs

Elevate the performance of your 2013-2018 Cummins 6.7L 24V engine with the BANKS 25992 Boost Tube Upgrade Kit. Designed to revolutionize airflow efficiency, this kit boasts Banks' massive 3-1/2-inch OEM boost tubes that significantly enhance flow area compared to the stock 2-3/4-inch tubes.

Constructed from premium aluminized steel, these mandrel bent tubes feature a constant 3-1/2-inch diameter with larger radius bends, ensuring unrestricted air passage for optimal engine power. The improved flow area, up to 103% more than stock tubes, facilitates increased fuel intake, resulting in heightened horsepower output.

The hot and cold side tubes in this kit are engineered to enhance turbo spool speed, enabling quicker response times. By bolstering intercooler tube flow, boost pressure retention is maximized between the turbo, intercooler, and intake, ultimately delivering peak horsepower performance. The red powder-coat finish not only provides a stylish look but also ensures a secure grip, enhancing durability under high-boost conditions.

For those seeking maximum airflow gains, these Boost Tubes are compatible with both stock elbows and the new Banks Monster-Ram Gen 2, offering an unparalleled increase in airflow efficiency. The key features of this kit include constant tension clamps for leak prevention, heavy-duty silicone couplers for durability, enhanced cooling capacity, a precise fit and finish, and reduced exhaust gas temperatures for optimal engine operation.

Upgrade your Cummins engine with the BANKS 25992 Boost Tube Kit and experience a new level of power and performance that will elevate your driving experience to greater heights.