ATS 303-901-2326 68RFE PERFORMANCE VALVE BODY WITH SOLENOID PACK FOR 07.5-11 DODGE RAM WITH 6.7L CUMMINS

The valve body is considered the nervous system of the transmission; the valve body is responsible for converting the electrical signals from the TCM into hydraulic actions. The 68-RFE uses a non-synchronous, clutch-to-clutch design. This means that the shifts from gear to gear must be timed perfectly thereby releasing and applying a friction clutch to achieve an flawless shift.

Because of the sensitivity of the hydraulic circuits, we heavily modified many areas of the valve body. Hydraulic oil flow is ported to certain clutch packs where additional pressure is needed. The accumulator piston seals have been redesigned to ensure hydraulic pressure integrity. The accumulator plate is made of high-grade material to compensate for the additional pressure that the accumulator pistons and springs exert during heavy power situations.

Also, the ATS 68-RFE valve body can be installed in a stock transmission for increased transmission capacity. When our performance valve body is installed in a good stock transmission you can expect the transmission to hold on average an additional 100HP. When the valve body is installed with the addition of the ATS Co-Pilot transmission controller your stock transmission will hold power levels of 200HP over stock.

Understanding what our performance valve body does vs our Co-Pilot does can be confusing so this is a brief description. The valve body allows for increased pressure to the clutch packs which provides for higher transmission power capacity. That being said the valve body must be commanded by the TCM to be able to produce the higher line pressure.

The TCM presents a problem, the TCM does not have the ability to command the line pressure that the transmission needs to be able to hold the higher HP levels. If the Co-Pilot is installed on a stock valve body then the stock valve body does not have the ability to produce or handle the higher line pressure that is being commanded.

Because of these two issues you only get partial line pressure gains when only the performance valve body or the Co-Pilot is installed separately. Because of the complexity of the 68-RFE electrical and hydraulic system in order to get the full effect of the valve body the Co-Pilot should be installed in addition to the valve body.
Features:

• ATS 68RFE Performance Valve Body Assembly with Upgraded OEM Cast Channel Plate
• With Solenoid Pack
• Transmission Model: 68RFE
• Engine Manufacturer: Cummins
• Fits: 2007.5-2011 Dodge RAM

The ATS 303-901-2326 68RFE Performance Valve Body with Solenoid Pack for 2007.5-2011 Cummins 6.7L 24V is designed to revolutionize the functioning of your transmission system. Acting as the transmission's nervous system, the valve body is entrusted with seamlessly converting electrical signals from the TCM into hydraulic actions for smooth gear shifts.

Crafted with precision to accommodate the unique clutch-to-clutch design of the 68-RFE transmission, our valve body boasts strategic modifications that enhance hydraulic circuit sensitivity. By optimizing hydraulic oil flow to specific clutch packs and reinforcing accumulator piston seals and plate with durable materials, this performance valve body ensures unmatched hydraulic pressure integrity under varying power demands.

Installing the ATS 68-RFE valve body not only reinforces a stock transmission's capacity but also amplifies its power potential by an average of 100HP. By complementing this upgrade with the ATS Co-Pilot transmission controller, you can elevate your transmission's power threshold to 200HP above stock levels, paving the way for enhanced performance and efficiency.

While the valve body boosts pressure to clutch packs, facilitating increased power capacity, the Co-Pilot addresses the limitation of TCM in commanding the necessary line pressure for high HP levels. To unlock the full potential of the valve body, it is recommended to pair it with the Co-Pilot for comprehensive line pressure control, ensuring optimal performance and power retention.

Featuring an ATS 68RFE Performance Valve Body Assembly with Upgraded OEM Cast Channel Plate and a Solenoid Pack, this product is specifically designed for the 68RFE transmission model by Cummins, fitting seamlessly into Dodge RAM models from 2007.5 to 2011. Elevate your transmission system with the ATS 303-901-2326 68RFE Performance Valve Body and experience unparalleled power and efficiency on the road.

******CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.