Product Description
ATI TTW60 is a DOT special-permit, 60-gallon wedge-style aluminum refueling tank engineered for pickup beds and flatbeds—especially where 5th-wheel clearance and rearward visibility matter. Built from .125" diamond-plate aluminum, it’s fully baffled, pressure/leak-tested, and approved for on-the-go refueling when installed and used per ATI guidance.
Key Features
- 60-gallon capacity; built under a U.S. DOT special permit for legal refueling from the tank.
- Wedge profile slopes toward the tailgate side for improved 5th-wheel clearance and sightlines.
- .125" aluminum construction; fully baffled interior for stability.
- Two reinforced 2" NPT bungs—place fill cap or transfer pump on your preferred side.
- Standard vented filler cap; lockable vented cap available as an accessory.
- Includes hold-down/mounting tabs; clean interior; pressure & leak tested.
- Approved for gasoline, diesel, kerosene, methanol, and aviation fuel (per permit).
Fitment
Universal pickup bed fit—ideal for full-size trucks and flatbeds. The wedge design is especially helpful with 5th-wheel hitches and rearward visibility. Always verify bed clearances and hitch geometry before ordering.
Dimensions & Capacity
- Capacity: 60 gallons
- Overall length (L): 56"
- Overall width (W): 20"
- Overall height (H): 18"
- Wedge sub-measures: H-2 = 4", W-2 = 6" (manufacturer/retailer spec)
- Notes: Mounting tabs can add ~1.5" per side; fuel cap adds ~2.5" to total height—account for these when measuring.
What’s Included
- ATI TTW60 wedge aluminum refueling tank
- Mounting/hold-down tabs
- Standard vented filler cap
Pumps/hoses sold separately. Add a 12V transfer pump kit and a vented lockable cap for a complete setup.
Compliance
Manufactured in the USA and built under a U.S. DOT special permit that authorizes refueling from the tank when properly installed and used.
Installation Notes
- Bolt through the welded tabs with appropriate hardware to the truck bed per ATI instructions.
- Wedge shape slopes at ~45° toward the tailgate side for 5th-wheel clearance.
- Use either 2" NPT bung for your pump or cap placement.
FAQ
- Is the TTW60 DOT-approved for gasoline as well as diesel?
- Yes. Under ATI’s DOT special permit, the TTW60 is authorized for gasoline, diesel, kerosene, methanol, and aviation fuel. Always follow local regulations and ATI’s usage guidance.
- Does this tank include a pump?
- No. The tank ships with mounting tabs and a standard vented cap. Add a compatible 12V transfer pump/hoses as needed.
- Will it work with a 5th-wheel hitch?
- That’s what the wedge profile is for—improved clearance and sightlines. Measure your bed and hitch; the overall size is roughly 56" (L) x 20" (W) x 18" (H), plus cap height.
- What exact dimensions should I plan around?
- Plan for ~56" (L) x 20" (W) x 18" (H) overall, with wedge sub-measures H-2 ≈ 4" and W-2 ≈ 6". Tabs can add ~1.5"/side; cap adds ~2.5" to height.
- Is the interior baffled?
- Yes. The tank is fully baffled to reduce fuel movement and improve stability.
