Product Description
ATI TTR58CB combines a DOT special-permit refueling tank (58 gallons) with a low-profile 6" toolbox for secure storage and on-the-go fueling. Built from .125" diamond-plate aluminum, it’s fully baffled, pressure/leak tested, and designed for legal refueling when installed and used per ATI guidance.
Key Features
- 58-gallon capacity refueling tank; legal for gasoline, diesel, kerosene, methanol & aviation fuel under ATI’s permit.
- Integrated combo with 6"-high locking toolbox for low-profile bed clearance.
- .125" aluminum construction; fully baffled interior for stability.
- Vented filler cap; lockable vented cap available as an accessory.
- Includes welded mounting tabs; clean interior; pressure & leak tested.
Fitment
Universal pickup bed fit for most full-size truck beds. The tank’s notched bottom helps clear wheel wells; always verify bed/toolbox clearances before ordering.
Dimensions & Capacity
- Capacity: 58 gallons
- Tank (overall): 58" (L) x 21" (W) x 19" (H)
- Bottom length (notched): ~51"
- Toolbox (low profile): 42" (L) x 19" (W) x 6" (H)
- Approx. dry weight: ~138 lb
What’s Included
- ATI TTR58CB 58-gallon refueling tank + integrated 6" toolbox
- Welded hold-down/mounting tabs
Pumps/hoses sold separately. Add a 12V transfer pump kit and a vented lockable cap for a complete setup.
Compliance
Manufactured in the USA and built under a U.S. DOT special permit authorizing refueling from the tank when correctly installed and used.
Installation Notes
- Bolt through the welded tabs with appropriate hardware into the truck bed per ATI instructions.
- Verify lid clearance and total height with the cap installed.
FAQ
- Is the TTR58CB approved for gasoline as well as diesel?
- Yes. Under ATI’s special permit, this refueling tank is approved for gasoline, diesel, kerosene, methanol, and aviation fuel. Always follow local regulations and ATI usage guidance.
- Does the combo include a pump?
- No. The tank ships with a standard vented cap and mounting tabs. Add a compatible 12V transfer pump/hoses if needed.
- What are the exact dimensions?
- The tank measures ~58" L x 21" W x 19" H, with a ~51" notched bottom length. The low-profile toolbox is ~42" L x 19" W x 6" H.
- Is the interior baffled?
- Yes—fully baffled to reduce fuel slosh and improve stability.
- Will it fit my truck bed?
- It’s a universal pickup bed design. Measure your bed and toolbox area (including lid clearance); the notched base helps clearance around wheel wells.
