Product Description
ATI TTR50 is a DOT special-permit, 50-gallon rectangular aluminum refueling tank designed for safe, legal fueling from your truck bed when installed and used per ATI guidance. Built from .125" diamond-plate aluminum, it’s fully baffled, pressure/leak-tested, and ready for jobsite or farm refueling.
Key Features
- 50-gallon capacity; DOT special-permit refueling authorization.
- .125" aluminum construction, fully baffled interior for stability.
- Two 2" NPT reinforced bungs (for cap/pump placement), 3/8" NPT drain.
- Includes vented filler cap; lockable vented cap available.
- Clean interior; pressure & leak tested; includes hold-down/mounting tabs.
- Approved for gasoline, diesel, kerosene, methanol, and aviation fuel (per permit).
Fitment
Universal pickup bed fit for most full-size trucks. Rectangular footprint maximizes capacity while keeping install simple. Always verify bed clearances before ordering.
Dimensions & Capacity
- Capacity: 50 gallons
- Overall length (L): 36.25"
- Overall width (W): 19"
- Overall height (H): 19"
- Notes: Mounting tabs can add ~1.5" per side; fuel cap adds ~2.5" to total height—account for this when measuring.
What’s Included
- ATI TTR50 rectangular aluminum refueling tank
- Mounting/hold-down tabs
Pumps/hoses sold separately. Add a 12V transfer pump kit and a vented lockable cap for a complete setup.
Compliance
Manufactured in the USA and built under a U.S. DOT special permit that authorizes refueling directly from the tank when properly installed and used.
Installation Notes
- Bolt through welded tabs with appropriate hardware into the truck bed per ATI instructions.
- Place the fill cap or transfer pump on your preferred side using the two 2" NPT bungs.
FAQ
- Is the TTR50 DOT approved for gasoline as well as diesel?
- Yes. Under ATI’s DOT special permit, the TTR50 is authorized for gasoline, diesel, kerosene, methanol, and aviation fuel. Follow local regulations and ATI’s usage guidance.
- Does this tank include a pump?
- No. The tank ships with mounting tabs and a standard vented cap. Add a compatible 12V transfer pump/hoses as needed.
- What are the exact dimensions?
- Plan for ~36.25" (L) x 19" (W) x 19" (H). Tabs may add ~1.5" per side; the cap can add ~2.5" to overall height—measure bed rail/toolbox clearance.
- Is the interior baffled?
- Yes. The tank is fully baffled to reduce fuel movement and improve stability.
- Can I choose which side the pump/cap is on?
- Yes. The tank has two 2" NPT bungs so you can place the fill cap or pump on your preferred side.
