Product Description
ATI TTR110 is a DOT special-permit, 110-gallon rectangular aluminum refueling tank engineered for legal on-the-go fueling when installed and used per ATI guidance. Built from .125" diamond-plate aluminum, it’s fully baffled, pressure/leak-tested, and set up with two 2" NPT bungs so you can position the fill cap or transfer pump on either side.
Key Features
- 110-gallon capacity; U.S. DOT special-permit refueling (see permit details below).
- Rectangular footprint maximizes capacity while keeping a low 24" bed height profile.
- .125" aluminum construction; fully baffled interior for stability.
- Vented filler cap; lockable vented cap available.
- Includes hold-down/mounting tabs; clean interior; pressure & leak tested.
Fitment
Universal pickup bed fit for most full-size truck beds. Always verify bed measurements before ordering.
Dimensions & Capacity
- Capacity: 110 gallons
- Overall width: 48.5"
- Overall length (front-to-back): 24"
- Overall height: 24"
- Notes: Mounting tabs extend out ~1.5" per side; fuel cap adds ~2.5" to total height—account for these when measuring.
What’s Included
- ATI TTR110 rectangular aluminum refueling tank
- Mounting/hold-down tabs
Pumps/hoses sold separately. Add a 12V transfer pump kit and a vented lockable cap to complete the system.
Compliance
Manufactured in the USA and built under a U.S. DOT Special Permit authorizing refueling from the tank when properly installed and used.
Installation Notes
- Bolt through welded tabs with appropriate hardware into the truck bed per ATI instructions.
- Use the two 2" NPT bungs to place your cap/pump on the preferred side.
FAQ
- Is the TTR110 DOT approved for gasoline as well as diesel?
- Yes. Under ATI’s DOT special permit, the TTR110 is authorized for gasoline, diesel, kerosene, methanol, and aviation fuel. Always follow local regulations and ATI’s usage guidance.
- Does this tank include a pump?
- No. The tank ships with mounting tabs and a standard vented cap. Add a compatible 12V transfer pump/hoses as needed.
- Will it fit my truck bed?
- The rectangular footprint is 48.5" (W) x 24" (L) x 24" (H). Remember tabs can add ~1.5" per side and the cap adds ~2.5" to height. Measure your bed to confirm clearance.
- Is the interior baffled?
- Yes. The tank is fully baffled to reduce fuel movement and improve stability.
- Can I choose which side the pump or cap goes on?
- Yes. Two reinforced 2" NPT bungs let you mount the fill cap or transfer pump on either side.
