Product Description
ATI TTL95SCB is a DOT special-permit, split 95-gallon (46/46) aluminum refueling tank with an integrated crossover toolbox. Built from .125" diamond-plate aluminum, it’s fully baffled, pressure/leak-tested, and ready for legal refueling when installed and used per ATI guidance.
Key Features
- Split capacity: 95 gallons total (46/46) for two separate fuels.
- Integrated toolbox: welded combo design for secure storage and fueling.
- .125" aluminum construction, fully baffled interior for stability.
- Two 2" NPT reinforced bungs allow pump/cap placement on your preferred side.
- Vented filler cap; lockable vented caps available as accessories.
- Includes mounting/hold-down tabs; clean, debris-free interior; pressure & leak tested.
Fitment
Universal pickup bed fit for full-size trucks. Verify bed/toolbox clearances and account for cap height and mounting tabs before ordering.
Dimensions & Capacity
- Total Capacity: 95 gallons (split 46/46)
- Tank overall: ~26" (H) × 48.5" (L) × 33" (W)
- Toolbox: ~48" (L) × 22" (W) × 17" (H)
- Notes: Mounting tabs extend ~1.5" each side; add ~2.5" for fuel cap height when measuring.
What’s Included
- ATI TTL95SCB split refueling tank & welded toolbox combo
- Mounting/hold-down tabs
Pumps/hoses sold separately. Add a 12V transfer pump kit and vented lockable caps for a complete setup.
Compliance
Manufactured in the USA and built under a U.S. DOT Special Permit (SP14227) authorizing refueling from the tank when properly installed and used.
Installation Notes
- Bolt through welded tabs with appropriate hardware into the truck bed per ATI instructions.
- Confirm toolbox lid clearance and total height with the cap installed.
- Position the pump/cap using the two 2" NPT bungs to suit your layout.
FAQ
- Is TTL95SCB DOT-approved for gasoline as well as diesel?
- Yes. Under ATI’s DOT special permit, this tank is authorized for gasoline, diesel, kerosene, methanol, and aviation fuel. Follow local regulations and ATI’s usage guidance.
- Does the combo include a pump?
- No. The tank ships with mounting tabs and a standard vented cap. Add a compatible 12V transfer pump/hoses as needed.
- What are the exact dimensions I should plan around?
- Plan for ~26" (H) × 48.5" (L) × 33" (W) for the tank and ~48" (L) × 22" (W) × 17" (H) for the toolbox. Account for mounting tabs (~1.5" per side) and cap height (~2.5").
- How is the split arranged?
- It’s two isolated compartments—approximately 46 gallons each—so you can carry two different fuels.
- Is the interior baffled?
- Yes. It’s fully baffled to reduce fuel movement and improve stability.
