Product Description
ATI TTL95 is a DOT special-permit, 95-gallon, L-shaped aluminum refueling tank engineered to nest under a crossover/chest toolbox so you can haul fuel and keep your bed storage. Built from .125" diamond-plate aluminum, it’s fully baffled, pressure/leak-tested, and ready for legal refueling when installed and used per ATI guidance.
Key Features
- 95-gallon capacity; built under a U.S. DOT special permit for legal refueling from the tank.
- L-shape profile fits beneath most crossover/chest toolboxes; can be installed reversed for easier removal independent of the toolbox.
- .125" aluminum construction, fully baffled interior for stability.
- Vented filler cap; lockable vented cap available.
- Includes hold-down/mounting tabs; clean interior; pressure & leak tested.
- Approved for gasoline, diesel, kerosene, methanol, and aviation fuel (per permit).
Fitment
Universal pickup bed fit—common for full-size truck beds. Designed to work with a crossover/chest toolbox; the lower “L” section sits beneath the box. Always verify bed and toolbox clearances before ordering.
Dimensions & Capacity
- Capacity: 95 gallons
- Overall width (B): 48.5"
- Overall length (C): 33"
- Overall height (D): 26"
- Lower leg height (A): 9"
- Upper section sub-measures: E = 11", F = 17", G = 22" (manufacturer line drawing)
- Notes: Mounting tabs may add ~1.5" each side; fuel cap adds ~2.5" to total height—account for this when measuring.
What’s Included
- ATI TTL95 L-shaped aluminum refueling tank
- Mounting/hold-down tabs
Pumps/hoses sold separately. Add a 12V transfer pump kit and a vented lockable cap for a complete setup.
Compliance
Manufactured in the USA and built under a U.S. DOT special permit that authorizes refueling from the tank when properly installed and used.
Installation Notes
- Bolt through welded tabs with appropriate hardware into the truck bed per ATI instructions.
- If used with a toolbox, verify lid clearance and total height with the cap installed.
- Two 2" NPT bungs allow you to place the fill cap or transfer pump on your preferred side.
FAQ
- Is the TTL95 DOT approved for gasoline as well as diesel?
- Yes. Under ATI’s DOT special permit, the TTL95 is authorized for gasoline, diesel, kerosene, methanol, and aviation fuel. Always follow local regulations and ATI’s usage guidance.
- Does this tank include a pump?
- No. The tank ships with mounting tabs and a standard vented cap. Add a compatible 12V transfer pump/hoses as needed.
- Will it fit with my crossover toolbox?
- The lower “L” section is designed to fit under most standard crossover/chest boxes. Measure your box and bed; the tank can also be installed reversed so it can be removed without removing the toolbox.
- What exact dimensions should I plan around?
- Plan for ~48.5" (W) x 33" (L) x 26" (H) overall, with sub-measures A=9", E=11", F=17", G=22". Tabs can add ~1.5" per side; cap adds ~2.5" to height.
- Is the interior baffled?
- Yes. The tank is fully baffled to reduce fuel movement and improve stability.
