Product Description
ATI TTL80 is a DOT-approved, 80-gallon, L-shaped aluminum refueling tank designed to slide under a crossover-style toolbox so you can carry maximum fuel and keep bed storage. It’s fully baffled, pressure/leak-tested, and built for safe, legal refueling of equipment, trucks, and machinery.
Key Features
- 80-gallon capacity with DOT special permit for refueling while mounted.
- L-shape profile fits beneath most crossover/chest toolboxes; can be installed reversed to remove the tank without removing the toolbox.
- .125" aluminum construction (bright/diamond finish), fully baffled interior.
- Standard vented filler cap; lockable vented cap available.
- Two 2" NPT reinforced bungs, 3/8" NPT drain, included hold-down brackets.
- Clean interior; pressure & leak tested; backed by manufacturer warranty.
Fitment
Universal pickup bed fit—common in full-size truck beds. Designed to work with a crossover or chest toolbox; the lower “L” section sits beneath the box. Always verify bed/toolbox clearances before ordering.
Dimensions & Capacity
- Capacity: 80 gallons
- Overall length (L): 48.5"
- Overall width (W): 28"
- Overall height (H): 26"
- Lower leg height: 9.5"
- Lower leg width: 8"
- Upper section height: 16.5"
- Upper section width: 20"
- Notes: Mounting tabs may extend width by ~1.5" per side; fuel cap adds ~2.5" to total height—account for toolbox lid and rail clearance.
What’s Included
- ATI TTL80 L-shaped aluminum refueling tank
- Hold-down brackets and mounting tabs
Pumps/hoses sold separately. Add a 12V transfer pump kit and a vented lockable cap for a complete setup.
Compliance
Manufactured in the USA and built under DOT Special Permit SP14227 authorizing legal refueling from the tank (when properly installed/used). Approved for gasoline, diesel, kerosene, methanol, and aviation fuel per the permit.
Installation Notes
- Secure through mounting tabs with appropriate hardware per ATI instructions.
- If used with a toolbox, verify lid clearance and total height with cap.
- Tank can be rotated (reversed) to ease removal independent of the toolbox.
FAQ
- Is the TTL80 DOT approved for refueling gasoline and diesel?
- Yes. Under ATI’s DOT Special Permit, the TTL80 is approved for gasoline, diesel, kerosene, methanol, and aviation fuel. Always follow local regulations and ATI’s installation/usage guidance.
- Does this tank include a pump?
- No. The tank ships with mounting brackets and a standard vented cap. Add a compatible 12V transfer pump/hoses as needed.
- Will it fit with my crossover toolbox?
- The “L” leg tucks beneath most standard crossover/chest boxes. Measure your box and bed; the tank can be installed reversed so it can be removed without removing the toolbox.
- What exact measurements should I plan around?
- Plan for 48.5" (L) x 28" (W) x 26" (H) overall with sub-measures 9.5" (lower leg height), 8" (lower leg width), and 16.5" × 20" (upper section). Remember the cap adds ~2.5" height and tabs can extend width ~1.5" per side.
- Is the interior baffled?
- Yes. The tank is fully baffled to reduce fuel movement and improve stability.
