Description

The ATI Aluminum Refueling Transfer Tank is designed and constructed with the industrial user in mind and allows for refueling equipment or remote machinery without removing the tank from the vehicle. The DOT approved tank is made from rugged diamond plate and mill finish aluminum. At only 36in.L, this L-shape tank will fit in any pickup or utility bed and can also be installed in reverse so the fuel tank can be removed without removal of your toolbox.

What's Included

(1) Aluminum refueling tank with lockable cap

Features + Benefits

Designed and constructed for industrial use
Built under special permit issued by U.S. Dept. of Transportation for legal use with gas, diesel, methanol, kerosene, aviation fuel and other liquids
L-shape designed to be used with crossover style toolbox or chest box
Bottom of tank fits under most standard toolboxes
Two 2in. NPT reinforced bungs for superior strength
3/8in. NPT drain
Hold-down brackets
Pressure and leak detection tested
Clean and free of debris inside and outside of tank
Designed for use with transfer pumps up to 30 lbs.
One-year limited warranty
DOT approved

L Shape Refueling Tanks

Our L-shape Refueling Tanks were designed to be used with a crossover style toolbox or chest box. The bottom of the L-shape fits under most standard toolboxes. The fuel tank can also be installed in reverse so the fuel tank can be removed without removal of your toolbox. The Two- 2” bungs allow for reversing the fuel fill cap and fuel transfer pump to the side you prefer best.

Important Notes:

Mounting tabs extend out 1-1/2″
Add 2-12″ for cap height

Downloads:

Click Here to view our online Refueling Tank Catalog

Refueling Tank Installation Instructions

ATI TTL80 80 GALLON L-SHAPED REFUELING TANK

L-shape Refueling Tanks

ATI refueling transfer tanks are designed and constructed with the industrial user in mind. Whether you are a farmer, contractor, municipality, or simply a private citizen, you can trust that your ATI tank will hold up and last a lifetime. We believe that in order to offer the best tank on the market, we need to start with the highest quality materials available. All of ATI’s tanks are manufactured here in the USA. Many manufacturers save a few dollars by outsourcing their fabrication without considering the overall quality of the finished product. Our refueling tanks are legal in all 50 states for gasoline, kerosene, methanol, diesel, and aviation fuel.

All ATI refueling tanks come standard with a 3/8″npt drain plug, two 2″npt bungs, a vent/prevent cap, and fully welded baffles to reduce slosh and add strength. These tanks are constructed from rugged diamond plate aluminum and are all available with a black or white powder coated finish. Custom L-shaped refueling tanks are available upon request. Click here to fill out a custom tank form.