Product Description
ATI TTL50 is a DOT-approved, 47-gallon, L-shaped aluminum refueling tank designed to tuck under a crossover-style toolbox so you can carry fuel and still keep your bed storage. Fully baffled and pressure/leak-tested, it’s built for on-the-go refueling of equipment, trucks, and machinery.
Key Features
- 47-gallon capacity; DOT special permit allows legal refueling from the tank.
- L-shape profile fits under most standard crossover/chest toolboxes; can be installed reversed for easier removal independent of the toolbox.
- .125" aluminum construction (diamond plate / bright finish), fully baffled interior.
- Vented filler cap; lockable vented cap available as an accessory.
- Includes hold-down brackets; clean, debris-free interior; pressure & leak tested.
- Approved for gasoline, diesel, kerosene, methanol, and aviation fuel (per permit).
Fitment
Universal pickup bed fit—common in full-size truck beds. Designed to work with a crossover/chest toolbox; the lower “L” section sits beneath the box. Always verify bed and toolbox clearances before ordering.
Dimensions & Capacity
- Capacity: 47 gallons
- Overall length (L): ~36.25"
- Overall width (W): ~30"
- Overall height (H): ~19"
- Lower leg height: ~8"
- Upper section height: ~11"
- Upper section width: ~22"
- Note: Fuel cap adds ~2.5" to total height; account for this when measuring.
What’s Included
- ATI TTL50 L-shaped aluminum refueling tank
- Hold-down brackets and mounting tabs
Pumps/hoses sold separately. Add a 12V transfer pump kit and a vented lockable cap for a complete setup.
Compliance
Manufactured in the USA and built under DOT Special Permit SP14227 for legal refueling from the tank when properly installed and used.
Installation Notes
- Mount through the tabs with 3/8" hardware to the truck bed per ATI instructions.
- If using with a toolbox, verify lid clearance and total height with cap.
FAQ
- Is the TTL50 DOT approved for refueling gasoline as well as diesel?
- Yes. Under ATI’s DOT Special Permit, the TTL50 is approved for gasoline, diesel, kerosene, methanol, and aviation fuel. Always follow local regulations and ATI’s installation/usage guidance.
- Does this tank include a pump?
- No. The tank ships with mounting brackets and standard vented cap. Add a compatible 12V transfer pump/hoses as needed.
- Will it fit with my crossover toolbox?
- The lower “L” section is sized to fit beneath most standard crossover and chest boxes. Measure your box and bed; the tank can also be installed reversed so it can be removed without removing the toolbox.
- What are the exact dimensions I should plan around?
- Plan for ~36.25" (L) x 30" (W) x 19" (H) overall. The cap adds ~2.5" to height. Verify clearances for your toolbox lid and bed rails.
- Is the interior baffled?
- Yes. The tank is fully baffled to reduce fuel movement and improve stability.
