Product Description
ATI SSL95 Severe Series is a heavy-duty .190" aluminum, L-shaped refueling tank engineered for harsh, off-road conditions and larger pumps. Built under ATI’s U.S. DOT special permit for legal refueling when installed/used per instructions, it features fully welded baffles, a rollover-protected vent, and unique internal pump bung supports.
Key Features
- Severe Series construction: ~50% thicker .190" diamond-plate aluminum vs. standard tanks.
- Fully welded internal baffles to reduce slosh and add strength.
- Unique internal pump bung supports; two 2" NPT bungs (mount pump either side).
- Vented/lockable cap; vent with rollover protection.
- DOT special-permit build allows refueling from the tank; approved for gasoline, diesel, kerosene, methanol, and aviation fuel (per permit).
- Designed to nest under a crossover/chest toolbox; can be reversed for easier removal independent of toolbox.
Fitment
Universal pickup bed fit for most full-size truck beds. The lower “L” leg tucks beneath common crossover/chest toolboxes. Always verify bed, rail, and toolbox clearances before ordering.
Dimensions & Capacity
- Model capacity class: 95 gallons (manufacturer line-drawing lists nominal capacity of 92 gallons)
- Overall width (B): 48.5"
- Overall length (C): 33"
- Overall height (D): 26"
- Lower leg height (A): 9"
- Upper section sub-measures: E = 11", F = 17", G = 22"
- Install notes: mounting tabs can add ~1.5" per side; fuel cap adds ~2.5" to overall height—plan measurements accordingly.
What’s Included
- ATI SSL95 Severe Series L-shaped refueling tank
- Hold-down/mounting tabs
Pumps/hoses sold separately. Add a 12V transfer pump and a vented lockable cap for a complete system.
Compliance
Manufactured in the USA under a U.S. DOT special permit that authorizes refueling from the tank when properly installed and used.
Installation Notes
- Bolt through welded tabs with appropriate hardware into the truck bed per ATI’s instructions.
- Verify toolbox lid/rail clearance and total height including cap.
- Two 2" bungs allow fill cap or pump placement on your preferred side.
FAQ
- Is the SSL95 DOT-approved for gasoline as well as diesel?
- Yes. Under ATI’s DOT special permit, Severe Series tanks are authorized for gasoline, diesel, kerosene, methanol, and aviation fuel. Always follow local regulations and ATI’s usage guidance.
- Does this tank include a pump?
- No. The tank ships with mounting tabs and a standard vented cap. Add a compatible 12V transfer pump/hoses as needed.
- Will it fit with my crossover toolbox?
- The lower “L” section is designed to fit beneath most standard crossover/chest boxes. Measure your box and bed; the tank can also be installed reversed so it can be removed without removing the toolbox.
- What exact dimensions should I plan around?
- Plan for ~48.5" (W) x 33" (L) x 26" (H) overall, with sub-measures A=9", E=11", F=17", G=22". Tabs may add ~1.5" per side; cap adds ~2.5" to height.
- What’s different about the Severe Series vs. standard?
- Severe Series uses .190" aluminum (~50% thicker), includes internal pump bung supports, rollover-protected vent, and carries a longer Severe Series warranty.
