Product Description
ATI AUX80LIKD is an 80-gallon, L-shaped aluminum auxiliary diesel tank bundled with ATI’s Fuel Shotz install kit for RAM (Dodge) 2013+. The Fuel Shotz system ties into the factory filler neck so your factory tank stays full until the auxiliary tank is empty, with no wires or switches required. Built from .125" diamond-plate aluminum, the tank is fully baffled, pressure/leak tested, and meets DOT requirements for auxiliary fuel tanks.
Key Features
- 80-gallon capacity L-shape designed to work with a crossover/chest toolbox.
- .125" aluminum construction; fully baffled interior for stability.
- Includes Fuel Shotz install kit for RAM 2013+; connects via factory filler neck.
- Vented automotive-style cap; rollover protection; clean interior.
- DOT-compliant for auxiliary tank use when installed/used as directed.
Fitment
RAM (Dodge) 2013+ with included Fuel Shotz install kit. L-shape fits under most crossover/chest toolboxes; verify bed/toolbox clearances before ordering.
Dimensions & Capacity
- Capacity: 80 gallons
- Overall length (B): 48.5"
- Overall width (C): 28"
- Overall height (D): 26"
- Lower leg height (A): 9.5"
- Upper section sub-measures: E = 8", F = 16.5", G = 20"
- Notes: Mounting tabs extend ~1.5" each side; add ~2.5" for cap height when measuring total clearance.
What’s Included
- ATI AUX80L 80-gal L-shaped auxiliary tank
- Fuel Shotz diesel install kit for RAM 2013+
- Mounting/hold-down tabs
Compliance
Meets DOT requirements for auxiliary fuel tanks. Use only for diesel auxiliary supply to the factory tank/engine per ATI instructions.
Installation Notes
- Gravity-feed system via Fuel Shotz adapter at the factory filler neck—no wiring or switches.
- Bolt through welded tabs to truck bed; confirm toolbox lid and rail clearances.
FAQ
- Does AUX80LIKD include the RAM (2013+) install kit?
- Yes. AUX80LIKD bundles the 80-gal L-shaped tank with the Fuel Shotz kit for RAM 2013+ so the factory tank stays full until the aux tank is empty.
- Is this tank DOT-approved to refuel equipment?
- This model is configured and rated as an auxiliary tank to feed your truck’s factory tank/engine. For on-the-go refueling of equipment, choose an ATI refueling/transfer tank (TTL series).
- Will it work with a crossover toolbox?
- Yes—the L-shape is designed to tuck under most crossover/chest boxes. Always measure, and account for mounting tabs (~1.5" per side) and cap height (~2.5").
- What are the exact dimensions?
- Approx. 48.5" (L) × 28" (W) × 26" (H); A=9.5", E=8", F=16.5", G=20".
- Is the interior baffled?
- Yes—fully baffled to reduce fuel slosh and improve stability.
