Product Description
ATI AUX65CBRG is a bright aluminum, rectangular gasoline auxiliary tank and toolbox combo that expands range and storage without sacrificing bed space. It’s built from .125" aluminum, fully baffled, pressure/leak tested, and designed to meet DOT fuel-tank requirements for gasoline auxiliary use. No installation kit is included with this model.
Key Features
- 62-gallon auxiliary gasoline capacity in a low-profile rectangle footprint.
- Integrated locking toolbox for secure storage (bright aluminum finish).
- .125" aluminum construction, fully baffled interior, pressure & leak tested.
- Includes pickup/return fittings, vent with rollover protection, and mounting tabs.
- Designed to meet Title 49 CFR 393.65 requirements for gasoline auxiliary tanks.
Fitment
Universal full-size pickup bed fit. Rectangle tank nests against the cab/front of the bed; verify toolbox and bed clearances before ordering. Not sold for use in some jurisdictions (e.g., CA restrictions may apply). Always confirm local regulations.
Dimensions & Capacity
- Capacity: 62 gallons
- Tank (L × W × H): 60" × 21" × 19"
- Toolbox (L × W × H): 54" × 21" × 6"
- Notes: Bottom of tank tapers; “54" across the bottom” callout appears in manufacturer notes. Always measure your bed and toolbox opening.
What’s Included
- ATI AUX65CBRG rectangular gasoline auxiliary tank & integrated toolbox
- Mounting/hold-down tabs
Pumps/hoses and the gasoline auxiliary install kit are sold separately.
Compliance
Designed to meet U.S. Title 49 CFR 393.65 requirements for gasoline auxiliary tanks when installed and used properly. Follow ATI instructions and local regulations.
Installation Notes
- No install kit included. Use the correct gasoline auxiliary install kit (filler-neck integration) for your truck to comply with regulations.
- Bolt through welded tabs into the bed with appropriate hardware; verify toolbox lid and bed rail clearance.
FAQ
- Does AUX65CBRG include the gasoline install kit?
- No. This listing is the tank + toolbox only. Use the correct gasoline auxiliary install kit for your truck’s filler neck.
- What are the exact tank and toolbox dimensions?
- The tank is ~60" (L) × 21" (W) × 19" (H). The toolbox is ~54" (L) × 21" (W) × 6" (H). Always measure your bed and toolbox opening.
- Is it DOT-approved for gasoline?
- ATI’s gasoline auxiliary tanks are built to meet Title 49 CFR 393.65 when installed and used properly (kit, venting, routing, and mounting all matter).
- Will it fit my full-size pickup with a bed liner?
- Yes, typically—verify length/width/height and allow clearance for liner thickness, toolbox lid, and any bed-rail caps.
- Why do some sites list 62 gal and others 65 gal?
- Retailers commonly list AUX65CBRG as 62 gallons working capacity. The ATI spec table references “65” for this model family; plan based on the retailer-listed 62 gal capacity.
