Product Description
ATI AUX46RIKD is a 46-gallon rectangular auxiliary diesel tank built from .125" diamond-plate aluminum and paired with the Fuel Shotz install kit for 2013+ Ram/Dodge trucks. Fully baffled with rollover-vent protection, it gravity-feeds through the factory filler neck to extend driving range without switches or wiring.
Key Features
- 46-gallon capacity; connects to factory tank via Fuel Shotz filler-neck adapter
- .125" aluminum construction, fully baffled interior
- Automotive-style cap and vent with rollover protection
- Standard 3/8" NPT outlet; clean, pressure/leak-tested build
- Made in the USA; diesel auxiliary use
Fitment
Vehicle-specific kit for Ram/Dodge 2013–current diesel trucks. Tank footprint fits most full-size beds; always verify bed layout and tie-down locations before ordering.
Dimensions & Capacity
- Capacity: 46 gallons
- Overall length: 57"
- Overall width: 12"
- Overall height: 16.5"–17" (varies by measurement method)
- Notes: Mounting tabs may add ~1.5" per side; fuel cap adds ~2.5" to overall height—account for these when measuring.
What’s Included
- ATI 46-gal rectangular auxiliary aluminum tank
- Fuel Shotz diesel install kit for 2013+ Ram/Dodge
- Mounting tabs/hold-downs
Compliance
Designed for diesel auxiliary use with installation through the filler neck. Meets applicable DOT/FHWA requirements when installed and used as directed by ATI.
Installation Notes
- Fuel Shotz kit keeps the factory tank “full” until the auxiliary tank is empty
- No wires or switches; kit includes rollover protection at tank and adapter
- Verify clearance for cap height and tab overhang before drilling
FAQ
- Does this come with the Ram/Dodge-specific install kit?
- Yes. AUX46RIKD includes the Fuel Shotz kit for 2013+ Ram/Dodge diesel trucks.
- Is this a refueling (pump-out) tank?
- No. AUX tanks are auxiliary tanks that plumb into the factory filler neck to extend range. For pump-out refueling, see ATI “TTR/TTL” refueling models.
- Will this work on gasoline trucks?
- No. This AUX46RIKD package is for diesel applications only.
- What dimensions should I plan for in my bed?
- Plan around 57" (L) × 12" (W) × 16.5–17" (H). Add ~1.5" each side for tabs and ~2.5" in height for the cap.
- Do I need to install any switches or wiring?
- No. The Fuel Shotz system uses the filler neck; your factory gauge drops from full only after the auxiliary tank empties.
